[Thu May  3 13:41:06 2012] Detection parameters:
  Position = (281.3, 282.7) = 20 33 14.94 41 18 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24684.4 +/- 187.3
  Background counts = 88.5
  Rate = 0.8 +/- 0.006

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 1.69'
[Sat May  5 03:26:58 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat May  5 03:26:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat May  5 14:40:28 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1.ximg exists
[Sat May  5 14:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1.csv
[Sat May  5 14:40:28 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May  5 14:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1.csv
[Sat May  5 14:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May  5 14:40:30 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May  5 14:42:12 2012] Spatial fit model total counts = 21177.100000, observed total counts = 19400.000000
[Sat May  5 14:42:12 2012] Offset between fit and detection position for source 4 = 0.286402 pixels
[Sat May  5 14:42:12 2012] 20596.660000 total counts/ 5391.460000 bgd. counts: snr = 207.080375
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.286402 pixels
  Position = (281.5, 282.5) = 20 33 14.88 41 18 48.9
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 15205.2 +/- 143.5
  Background counts = 5391.5
  Rate = 0.6 +/- 0.005
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major axis lower bound
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:51:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 6.23"
[Sun May  6 09:51:23 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.603
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23"
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1.csv
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1.csv
[Sun May  6 20:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:48 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  6 20:34:48 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  6 20:34:48 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 20269.500000, observed total counts = 19411.000000
[Sun May  6 20:36:11 2012] Offset between fit and detection position for source 4 = 0.120048 pixels
[Sun May  6 20:36:11 2012] 20251.640000 total counts/ 6008.840000 bgd. counts: snr = 183.738453
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.120048 pixels
  Position = (281.3, 282.5) = 20 33 14.93 41 18 49.0
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 14242.8 +/- 142.3
  Background counts = 6008.8
  Rate = 0.5 +/- 0.005
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:36:12 2012] Source is confused with source 73
[Mon May  7 07:46:02 2012] Counts = 14242.800000, rescaling region sizes by 3.000000
[Mon May  7 07:46:02 2012] XMMSAS src. selection expression = ellipse(24428.601200, 24526.853600, 975.902428, 975.902428, 0.000000, X, Y)
[Mon May  7 07:46:02 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_src.reg
[Mon May  7 07:46:02 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (225, 226) - (337, 339)
[Mon May  7 07:46:02 2012] XMMSAS bgd. selection expression = annulus(24428.601200, 24526.853600, 4879.512140, 9759.024281, X, Y) && !ellipse(25406.480800, 20083.846000, 366.394411, 366.394411, 0.000000, X, Y) && !ellipse(32143.958557, 19283.667038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21870.981140, 17103.213608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.528400, 26354.319600, 391.300811, 391.300811, 0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(25852.024994, 17905.185120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.346130, 18902.339783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19005.877960, 19570.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26846.468872, 31545.560089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.390656, 26976.435211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.042282, 30421.935760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14645.545600, 31718.499200, 482.822414, 482.822414, 0.000000, X, Y) && !ellipse(17097.699112, 15250.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.259705, 19994.407761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.551200, 23968.339800, 339.540010, 339.540010, 0.000000, X, Y) && !ellipse(27093.004272, 34637.458527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28379.450928, 27447.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.642059, 23177.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14704.755722, 27055.369232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.886000, 24647.087600, 2089.312060, 2089.312060, 0.000000, X, Y) && !ellipse(24857.312958, 20723.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.188812, 22326.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27558.916779, 35150.641174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21006.274360, 21332.478600, 469.577691, 469.577691, 0.000000, X, Y) && !ellipse(22941.298000, 24494.188000, 1044.656030, 1044.656030, 0.000000, X, Y) && !ellipse(14552.780518, 34454.067688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.545013, 22836.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.650700, 14504.059000, 635.086418, 366.849611, 0.000000, X, Y) && !ellipse(23813.514740, 27794.399292, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:02 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4.gif
[Mon May  7 07:46:24 2012] Mean detx,y = (86.85, 77.78) 
[Mon May  7 07:46:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 07:55:24 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 07:55:25 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May  7 07:55:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May  7 15:15:58 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:58 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May  7 15:16:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:05 2012] Using photon index=1.80, rate=0.533, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4.arf
[Mon May  7 15:16:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:05 2012] Updating source flux to 5.4e-12
[Mon May  7 15:21:24 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Mon May  7 15:32:00 2012] Reading fit data from xmm0505110401/analysis//spectral/fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_pl.csv
[Mon May  7 15:32:00 2012] Spectral fit parameter nH value = 8.62196e+21
[Mon May  7 15:32:00 2012] Spectral fit parameter PhoIndex value = 3.41647
[Mon May  7 15:32:00 2012] Failed to get F(0.3-8.0) from xmm0505110401/analysis//spectral/fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Mon May  7 15:32:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:32:00 2012] Using Nh = 8.6e+21, photon index=3.42, rate=0.533, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src4.arf
[Mon May  7 15:32:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:32:00 2012] Updating source flux to 4.7e-12