[Thu May  3 13:41:09 2012] Detection parameters:
  Position = (392.7, 128.2) = 20 32 32.04 41 7 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.1 +/- 20.5
  Background counts = 38.9
  Rate = 0.008 +/- 0.0007

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 14.11'
[Sat May  5 03:26:58 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Sat May  5 03:26:58 2012] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.791
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 13.48"
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51.csv
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51.csv
[Sat May  5 14:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat May  5 14:40:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat May  5 14:40:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sat May  5 14:40:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:42:13 2012] Warning, spatial fit 51 centroid is now closest to src. 28
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:42:13 2012] Source is confused with source 35
[Sun May  6 09:51:23 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Sun May  6 09:51:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.791
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 13.48"
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47.csv
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47.csv
[Sun May  6 20:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun May  6 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May  6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun May  6 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May  6 20:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:36:11 2012] Warning, spatial fit 47 centroid is now closest to src. 40
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:07 2012] XMMSAS src. selection expression = ellipse(34115.793060, 11103.193878, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39_src.reg
[Mon May  7 07:46:07 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (355, 91) - (430, 166)
[Mon May  7 07:46:07 2012] XMMSAS bgd. selection expression = annulus(34115.793060, 11103.193878, 1087.500000, 2175.000000, X, Y) && !ellipse(31501.247650, 10668.742142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32578.903000, 10356.633800, 558.487216, 558.487216, 0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(32262.160461, 11154.731979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.571686, 12420.202576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31599.698792, 12901.425308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33726.780823, 13099.065689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.216583, 12404.480820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32581.356049, 13715.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.544000, 11973.384000, 686.908820, 686.908820, 0.000000, X, Y) && !ellipse(33985.449707, 11625.904099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32708.865000, 12629.819400, 504.633615, 193.074099, 40.859000, X, Y) && !ellipse(33018.076000, 12223.730000, 2099.728060, 2099.728060, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39.gif
[Mon May  7 09:31:32 2012] Mean detx,y = (12562.01, 10617.67) 
[Mon May  7 09:31:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:32:00 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:32:00 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May  7 09:32:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon May  7 13:31:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 13:31:52 2012] rmf not generated due to insufficient counts
[Mon May  7 15:16:02 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:03 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May  7 15:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:08 2012] Using photon index=1.80, rate=0.00829, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src39.arf
[Mon May  7 15:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:08 2012] Updating source flux to 3.8e-13
[Mon May  7 15:21:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting