[Thu May  3 13:41:09 2012] Detection parameters:
  Position = (255.6, 141.3) = 20 33 24.83 41 8 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.3 +/- 23.1
  Background counts = 59.0
  Rate = 0.009 +/- 0.0007

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 11.81'
[Sat May  5 03:26:58 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 12.33"
[Sat May  5 03:26:58 2012] source mask rpix=2.8, npix_max = 44, mask sum = 45, frac = 1.011
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.33"
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49.ximg exists
[Sat May  5 14:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49.csv
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat May  5 14:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49.csv
[Sat May  5 14:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat May  5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sat May  5 14:42:13 2012] Warning, spatial fit 49 centroid is now closest to src. 24
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:51:23 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 12.33"
[Sun May  6 09:51:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 45, frac = 1.011
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 12.33"
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45.csv
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45.csv
[Sun May  6 20:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun May  6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun May  6 20:34:51 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun May  6 20:36:11 2012] Source 31 is offset by 0.669192 and 1.842495 pixels which is larger than
2 X fitted extent = 1.770667 x 1.770667, not incorporating fit results
[Sun May  6 20:36:11 2012] Warning, spatial fit 45 centroid is now closest to src. 24
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:06 2012] XMMSAS src. selection expression = ellipse(22187.817734, 12245.179062, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 07:46:06 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31_src.reg
[Mon May  7 07:46:06 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (218, 104) - (293, 179)
[Mon May  7 07:46:06 2012] XMMSAS bgd. selection expression = annulus(22187.817734, 12245.179062, 1087.500000, 2175.000000, X, Y) && !ellipse(22529.760000, 12977.324000, 420.407212, 420.407212, 0.000000, X, Y) && !ellipse(24301.650700, 14504.059000, 635.086418, 366.849611, 0.000000, X, Y)
[Mon May  7 07:46:06 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31.gif
[Mon May  7 09:28:07 2012] Mean detx,y = (870.92, 12504.24) 
[Mon May  7 09:28:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:28:47 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:28:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May  7 09:28:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May  7 13:22:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 13:22:11 2012] rmf not generated due to insufficient counts
[Mon May  7 15:16:02 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:02 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May  7 15:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:08 2012] Using photon index=1.80, rate=0.00935, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src31.arf
[Mon May  7 15:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:08 2012] Updating source flux to 2.3e-13
[Mon May  7 15:21:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting