[Thu May  3 13:41:08 2012] Detection parameters:
  Position = (349.2, 144.7) = 20 32 48.79 41 8 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 554.8 +/- 30.9
  Background counts = 50.5
  Rate = 0.02 +/- 0.001

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 11.74'
[Sat May  5 03:26:58 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Sat May  5 03:26:58 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.30"
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33.csv
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33.csv
[Sat May  5 14:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat May  5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat May  5 14:42:13 2012] Warning, spatial fit 33 centroid is now closest to src. 22
[Sat May  5 14:42:13 2012] Source 27 is offset by 3.030018 and -6.128681 pixels which is larger than
2 X fitted extent = 1.389812 x 1.389812, not incorporating fit results
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:51:23 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Sun May  6 09:51:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 12.30"
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src30.ximg exists
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun May  6 20:34:46 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src30 appears to have run properly
[Sun May  6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun May  6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun May  6 20:34:50 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun May  6 20:36:11 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.749986 pixels away
[Sun May  6 20:36:11 2012] Warning, spatial fit 30 centroid is now closest to src. 88
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:04 2012] XMMSAS src. selection expression = ellipse(30329.057526, 12540.918793, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 07:46:04 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27_src.reg
[Mon May  7 07:46:04 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (312, 107) - (387, 182)
[Mon May  7 07:46:04 2012] XMMSAS bgd. selection expression = annulus(30329.057526, 12540.918793, 1087.500000, 2175.000000, X, Y) && !ellipse(31501.247650, 10668.742142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32578.903000, 10356.633800, 558.487216, 558.487216, 0.000000, X, Y) && !ellipse(27518.096000, 9796.876000, 1952.280056, 1952.280056, 0.000000, X, Y) && !ellipse(29204.539000, 11288.423000, 475.789614, 475.789614, 0.000000, X, Y) && !ellipse(29330.371726, 14330.521107, 256.208961, 229.636007, -0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(30985.872000, 11432.432000, 513.182415, 513.182415, 0.000000, X, Y) && !ellipse(32262.160461, 11154.731979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.814000, 10628.496000, 2118.032061, 2118.032061, 0.000000, X, Y) && !ellipse(31706.571686, 12420.202576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.360000, 10113.564000, 1899.128055, 1899.128055, 0.000000, X, Y) && !ellipse(31599.698792, 12901.425308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.380000, 14111.194000, 613.108818, 613.108818, 0.000000, X, Y) && !ellipse(32581.356049, 13715.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.544000, 11973.384000, 686.908820, 686.908820, 0.000000, X, Y) && !ellipse(32708.865000, 12629.819400, 504.633615, 193.074099, 40.859000, X, Y) && !ellipse(29925.425800, 11615.886400, 236.527207, 180.164005, 332.603000, X, Y) && !ellipse(33018.076000, 12223.730000, 2099.728060, 2099.728060, 0.000000, X, Y) && !ellipse(29144.667542, 12723.895447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29085.367462, 9884.019028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:04 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27.gif
[Mon May  7 09:08:31 2012] Mean detx,y = (8651.81, 10154.74) 
[Mon May  7 09:08:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:08:56 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:08:57 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May  7 09:08:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May  7 12:32:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 12:32:09 2012] rmf not generated due to insufficient counts
[Mon May  7 15:16:01 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:01 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May  7 15:16:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:06 2012] Using photon index=1.80, rate=0.0176, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src27.arf
[Mon May  7 15:16:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:06 2012] Updating source flux to 4.8e-13
[Mon May  7 15:21:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting