[Thu May 3 13:41:08 2012] Detection parameters: Position = (346.7, 150.9) = 20 32 49.74 41 9 15.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 591.0 +/- 32.0 Background counts = 51.2 Rate = 0.02 +/- 0.001 [Thu May 3 13:41:15 2012] Off-axis axis estimate = 11.25' [Sat May 5 03:26:58 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting [Sat May 5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 12.06" [Sat May 5 03:26:58 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981 [Sat May 5 03:26:58 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 12.06" [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src30.ximg exists [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src30_1.ximg exists [Sat May 5 14:40:29 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src30 appears to have run properly [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Sat May 5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly [Sat May 5 14:42:12 2012] Source 22 is offset by -2.846307 and -4.541083 pixels which is larger than 2 X fitted extent = 1.318860 x 1.318860, not incorporating fit results [Sat May 5 14:42:12 2012] Warning, spatial fit 30 centroid is now closest to src. 33 [Sat May 5 14:42:13 2012] Spatial fit model total counts = 1375.790000, observed total counts = 1377.000000 [Sat May 5 14:42:13 2012] Offset between fit and detection position for source 22 = 0.854925 pixels [Sat May 5 14:42:13 2012] Warning, changing simple spatial fit ID from 30 to 33 Spatial fit parameters: Offset between fit and detection position for source 22 = 0.854925 pixels Position = (347.4, 150.4) = 20 32 49.48 41 9 14.3 Extent = 21.0 (19.3-23.0)", rotation angle = 0 Source counts = 1314.0 +/- 36.2 Background counts = 0.0 Rate = 0.05 +/- 0.001 Deleting source due to low signal-to-noise ratio