[Thu May  3 13:41:07 2012] Detection parameters:
  Position = (339.0, 165.3) = 20 32 52.71 41 10 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 755.7 +/- 34.9
  Background counts = 56.2
  Rate = 0.02 +/- 0.001

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 10.09'
[Sat May  5 03:26:58 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sat May  5 03:26:58 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.47"
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21.csv
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21.csv
[Sat May  5 14:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat May  5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat May  5 14:42:12 2012] Warning, spatial fit 21 centroid is now closest to src. 22
[Sat May  5 14:42:13 2012] Source 17 is offset by 1.360104 and 0.015338 pixels which is larger than
2 X fitted extent = 1.321103 x 1.321103, not incorporating fit results
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:51:23 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sun May  6 09:51:23 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.47"
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19.ximg exists
[Sun May  6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19.csv
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun May  6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19.csv
[Sun May  6 20:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun May  6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun May  6 20:34:50 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun May  6 20:36:11 2012] Warning, spatial fit 19 centroid is now closest to src. 27
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 595.498000, observed total counts = 595.000000
[Sun May  6 20:36:11 2012] Offset between fit and detection position for source 17 = 1.300277 pixels
[Sun May  6 20:36:11 2012] Warning, changing simple spatial fit ID from 19 to 72
[Sun May  6 20:36:11 2012] 596.331000 total counts/ 443.428000 bgd. counts: snr = 7.261134
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.300277 pixels
  Position = (337.7, 165.3) = 20 32 53.21 41 10 19.1
  Extent = 3.2 (2.9-4.6)", rotation angle = -0
  Source counts = 152.9 +/- 24.4
  Background counts = 443.4
  Rate = 0.006 +/- 0.0009
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Sun May  6 20:36:12 2012] Source is confused with source 88
[Mon May  7 07:46:03 2012] XMMSAS src. selection expression = ellipse(29330.371726, 14330.521107, 192.156721, 172.227005, -0.000000, X, Y)
[Mon May  7 07:46:03 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17_src.reg
[Mon May  7 07:46:03 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (327, 154) - (349, 176)
[Mon May  7 07:46:03 2012] XMMSAS bgd. selection expression = annulus(29330.371726, 14330.521107, 320.261201, 640.522402, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:03 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17.gif
[Mon May  7 08:46:40 2012] Mean detx,y = (7332.48, 8785.81) 
[Mon May  7 08:46:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 08:47:00 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 08:47:00 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May  7 08:47:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May  7 15:16:00 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:00 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May  7 15:16:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:06 2012] Using photon index=1.80, rate=0.00572, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src17.arf
[Mon May  7 15:16:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:06 2012] Updating source flux to 2.7e-13
[Mon May  7 15:21:24 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Mon May  7 15:21:24 2012] Flag c found in src. 17 procflags, skipping spectral fitting