[Thu May  3 13:41:01 2012] Detection parameters:
  Position = (369.9, 222.8) = 20 32 40.77 41 14 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3627.2 +/- 74.2
  Background counts = 90.8
  Rate = 0.2 +/- 0.004

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 7.54'
[Fri May  4 19:18:32 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Fri May  4 19:18:32 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.20"
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3.csv
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3.csv
[Sat May  5 03:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May  5 03:26:57 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May  5 14:41:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.805643 pixels away
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 06:51:28 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Sun May  6 06:51:28 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Sun May  6 06:51:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.20"
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src3.ximg exists
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May  6 09:51:22 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May  6 09:51:22 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May  6 20:35:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.805643 pixels away
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 05:16:42 2012] Counts = 3627.207520, rescaling region sizes by 2.000000
[Mon May  7 05:16:42 2012] XMMSAS src. selection expression = ellipse(32131.684357, 19334.691391, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May  7 05:16:42 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6_src.reg
[Mon May  7 05:16:42 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (295, 148) - (445, 298)
[Mon May  7 05:16:42 2012] XMMSAS bgd. selection expression = annulus(32131.684357, 19334.691391, 4350.000000, 8700.000000, X, Y) && !ellipse(24427.334200, 24535.433600, 1353.715239, 1353.715239, 0.000000, X, Y) && !ellipse(36311.441983, 23931.316761, 691.481535, 440.553452, 90.676383, X, Y) && !ellipse(25393.971375, 20041.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.056200, 11925.674000, 2082.440060, 759.820022, 256.406000, X, Y) && !ellipse(24654.823840, 26361.288800, 337.876010, 337.876010, 0.000000, X, Y) && !ellipse(30362.954285, 12047.998001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25843.571381, 17948.570953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34256.953003, 18904.313797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.972600, 10818.720000, 1056.960030, 1056.960030, 0.000000, X, Y) && !ellipse(30679.191760, 9757.324000, 2095.464060, 2095.464060, 0.000000, X, Y) && !ellipse(31831.464264, 11256.135513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.244200, 11355.828000, 674.732819, 261.932808, 340.918600, X, Y) && !ellipse(25617.123932, 17421.761368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.126831, 27003.001434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25867.692322, 20159.293045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23255.480000, 16342.420000, 1675.672048, 1675.672048, 0.000000, X, Y) && !ellipse(24641.026306, 17611.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.732483, 20845.623428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.596800, 28432.033800, 529.780015, 529.780015, 0.000000, X, Y) && !ellipse(24391.257080, 14506.167496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.045959, 10636.581108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33839.991272, 11491.724228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.039062, 25350.896179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32212.134399, 9908.692879, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 05:16:42 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6.gif
[Mon May  7 05:30:49 2012] Mean detx,y = (3534.65, -8943.50) 
[Mon May  7 05:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 05:34:50 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 05:34:51 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May  7 05:34:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon May  7 06:26:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 06:26:48 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:52 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:52 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May  7 15:15:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:55 2012] Using photon index=1.80, rate=0.216, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src6.arf
[Mon May  7 15:15:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:55 2012] Updating source flux to 3.2e-12
[Mon May  7 15:16:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting