[Thu May  3 13:41:03 2012] Detection parameters:
  Position = (283.8, 203.0) = 20 33 13.98 41 13 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.7 +/- 17.2
  Background counts = 93.7
  Rate = 0.005 +/- 0.0008

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 7.00'
[Fri May  4 19:18:32 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Fri May  4 19:18:32 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.93"
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26.csv
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26.csv
[Sat May  5 03:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May  5 03:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:37 2012] Spatial fit model total counts = 601.491000, observed total counts = 531.000000
[Sat May  5 14:41:37 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 06:51:28 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Sun May  6 06:51:28 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Sun May  6 06:51:28 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.93"
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25.csv
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25.csv
[Sun May  6 09:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May  6 09:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May  6 09:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May  6 09:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:44 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.582454 pixels away
[Sun May  6 20:35:44 2012] Spatial fit model total counts = 603.153000, observed total counts = 531.000000
[Sun May  6 20:35:44 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 05:16:43 2012] XMMSAS src. selection expression = ellipse(24641.026306, 17611.647736, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35_src.reg
[Mon May  7 05:16:43 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (246, 165) - (321, 240)
[Mon May  7 05:16:43 2012] XMMSAS bgd. selection expression = annulus(24641.026306, 17611.647736, 1087.500000, 2175.000000, X, Y) && !ellipse(25393.971375, 20041.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25843.571381, 17948.570953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.123932, 17421.761368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25867.692322, 20159.293045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23255.480000, 16342.420000, 1675.672048, 1675.672048, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35.gif
[Mon May  7 05:56:05 2012] Mean detx,y = (6999.56, -2084.05) 
[Mon May  7 05:56:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 05:56:41 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 05:56:42 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May  7 05:56:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon May  7 07:43:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 07:43:07 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:54 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:54 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May  7 15:15:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:57 2012] Using photon index=1.80, rate=0.00517, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src35.arf
[Mon May  7 15:15:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:57 2012] Updating source flux to 7.9e-14
[Mon May  7 15:16:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting