[Thu May  3 13:41:02 2012] Detection parameters:
  Position = (207.5, 350.2) = 20 33 43.50 41 23 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.2 +/- 18.9
  Background counts = 69.5
  Rate = 0.01 +/- 0.001

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 7.59'
[Fri May  4 19:18:32 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Fri May  4 19:18:32 2012] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.677
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.22"
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19.csv
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19.csv
[Sat May  5 03:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat May  5 03:26:57 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat May  5 14:41:37 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.747571 pixels away
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 06:51:28 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Sun May  6 06:51:28 2012] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.677
[Sun May  6 06:51:28 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.22"
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18.csv
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18.csv
[Sun May  6 09:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May  6 09:51:23 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun May  6 20:35:44 2012] Spatial fit model total counts = 349.441000, observed total counts = 366.000000
[Sun May  6 20:35:44 2012] Offset between fit and detection position for source 25 = 0.553974 pixels
[Sun May  6 20:35:44 2012] 355.119800 total counts/ 289.820000 bgd. counts: snr = 3.835727
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.553974 pixels
  Position = (207.0, 350.6) = 20 33 43.67 41 23 44.9
  Extent = 7.3 (3.6-11.5)", rotation angle = 0
  Source counts = 65.3 +/- 18.8
  Background counts = 289.8
  Rate = 0.003 +/- 0.0008
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 05:16:43 2012] XMMSAS src. selection expression = ellipse(17961.683392, 30452.742000, 437.705413, 437.705413, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25_src.reg
[Mon May  7 05:16:43 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (182, 325) - (232, 376)
[Mon May  7 05:16:43 2012] XMMSAS bgd. selection expression = annulus(17961.683392, 30452.742000, 729.509021, 1459.018042, X, Y)
[Mon May  7 05:16:43 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25.gif
[Mon May  7 05:50:48 2012] Mean detx,y = (-3933.81, 7431.66) 
[Mon May  7 05:50:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 05:51:15 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 05:51:15 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May  7 05:51:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon May  7 07:33:08 2012] Not generating rmf since there are only 65 counts
[Mon May  7 07:33:08 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:53 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:54 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May  7 15:15:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:56 2012] Using photon index=1.80, rate=0.00267, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src25.arf
[Mon May  7 15:15:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:57 2012] Updating source flux to 4.2e-14
[Mon May  7 15:16:17 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting