[Thu May  3 13:41:02 2012] Detection parameters:
  Position = (370.8, 114.5) = 20 32 40.47 41 6 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 14.7
  Background counts = 49.6
  Rate = 0.002 +/- 0.0005

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 14.33'
[Fri May  4 19:18:32 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Fri May  4 19:18:32 2012] source mask rpix=3.1, npix_max = 52, mask sum = 45, frac = 0.856
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.60"
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39.csv
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39.csv
[Sat May  5 03:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:58 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat May  5 03:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat May  5 03:26:58 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat May  5 03:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat May  5 03:26:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:20 2012] Warning, spatial fit 29 centroid is now closest to src. 32
[Sat May  5 14:41:20 2012] Warning, spatial fit 37 centroid is now closest to src. 47
[Sat May  5 14:41:20 2012] Warning, spatial fit 44 centroid is now closest to src. 52
[Sat May  5 14:41:20 2012] Warning, spatial fit 48 centroid is now closest to src. 51
[Sat May  5 14:41:20 2012] Warning, spatial fit 51 centroid is now closest to src. 1
[Sat May  5 14:41:20 2012] Warning, spatial fit 72 centroid is now closest to src. 76
[Sat May  5 14:41:37 2012] Warning, spatial fit 39 centroid is now closest to src. 16
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:37 2012] Source is confused with source 19
[Sat May  5 14:42:12 2012] Warning, spatial fit 19 centroid is now closest to src. 50
[Sat May  5 14:42:12 2012] Warning, spatial fit 20 centroid is now closest to src. 38
[Sat May  5 14:42:13 2012] Warning, spatial fit 75 centroid is now closest to src. 73
[Sun May  6 06:51:28 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Sun May  6 06:51:28 2012] source mask rpix=3.1, npix_max = 52, mask sum = 45, frac = 0.856
[Sun May  6 06:51:28 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 13.60"
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35.csv
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35.csv
[Sun May  6 09:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun May  6 09:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun May  6 09:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun May  6 09:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:31 2012] Warning, spatial fit 19 centroid is now closest to src. 8
[Sun May  6 20:35:32 2012] Warning, spatial fit 28 centroid is now closest to src. 33
[Sun May  6 20:35:32 2012] Warning, spatial fit 29 centroid is now closest to src. 33
[Sun May  6 20:35:32 2012] Warning, spatial fit 36 centroid is now closest to src. 40
[Sun May  6 20:35:32 2012] Warning, spatial fit 42 centroid is now closest to src. 44
[Sun May  6 20:35:33 2012] Warning, spatial fit 100 centroid is now closest to src. 109
[Sun May  6 20:35:44 2012] Warning, spatial fit 35 centroid is now closest to src. 16
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:36:11 2012] Warning, spatial fit 46 centroid is now closest to src. 23
[Mon May  7 05:16:43 2012] XMMSAS src. selection expression = ellipse(32212.134399, 9908.692879, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24_src.reg
[Mon May  7 05:16:43 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (333, 77) - (408, 152)
[Mon May  7 05:16:43 2012] XMMSAS bgd. selection expression = annulus(32212.134399, 9908.692879, 1087.500000, 2175.000000, X, Y) && !ellipse(31632.056200, 11925.674000, 2082.440060, 759.820022, 256.406000, X, Y) && !ellipse(30362.954285, 12047.998001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.972600, 10818.720000, 1056.960030, 1056.960030, 0.000000, X, Y) && !ellipse(30679.191760, 9757.324000, 2095.464060, 2095.464060, 0.000000, X, Y) && !ellipse(31831.464264, 11256.135513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.244200, 11355.828000, 674.732819, 261.932808, 340.918600, X, Y) && !ellipse(30676.045959, 10636.581108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33839.991272, 11491.724228, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24.gif
[Mon May  7 06:01:55 2012] Mean detx,y = (12532.68, -11161.04) 
[Mon May  7 06:01:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 06:02:25 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 06:02:26 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May  7 06:02:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon May  7 07:45:34 2012] Not generating rmf since there are only 59 counts
[Mon May  7 07:45:34 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:55 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:55 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May  7 15:15:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:58 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src24.arf
[Mon May  7 15:15:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:58 2012] Updating source flux to 7e-14
[Mon May  7 15:16:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting