[Thu May  3 13:41:02 2012] Detection parameters:
  Position = (358.8, 113.6) = 20 32 45.09 41 6 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 589.5 +/- 30.5
  Background counts = 51.1
  Rate = 0.02 +/- 0.001

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 14.10'
[Fri May  4 19:18:32 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Fri May  4 19:18:32 2012] source mask rpix=3.1, npix_max = 51, mask sum = 26, frac = 0.502
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 13.48"
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14.csv
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14.csv
[Sat May  5 03:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May  5 03:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May  5 03:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:37 2012] Source 19 is offset by -2.956761 and 0.401759 pixels which is larger than
2 X fitted extent = 1.549099 x 1.549099, not incorporating fit results
[Sat May  5 14:41:37 2012] Spatial fit model total counts = 720.214000, observed total counts = 701.000000
[Sat May  5 14:41:37 2012] Offset between fit and detection position for source 19 = 5.681259 pixels
[Sat May  5 14:41:37 2012] Warning, changing simple spatial fit ID from 14 to 36
[Sat May  5 14:41:37 2012] 691.447000 total counts/ 314.598000 bgd. counts: snr = 21.246597
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.681259 pixels
  Position = (353.2, 112.7) = 20 32 47.26 41 6 30.4
  Extent = 26.2 (26.1-52.4)", rotation angle = 0
  Source counts = 376.8 +/- 26.3
  Background counts = 314.6
  Rate = 0.02 +/- 0.001
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major axis lower bound
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:37 2012] Source is confused with source 39
[Sat May  5 14:41:37 2012] Source is confused with source 24
[Sun May  6 06:51:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 26.19"
[Sun May  6 06:51:28 2012] source mask rpix=6.0, npix_max = 170, mask sum = 56, frac = 0.329
[Sun May  6 06:51:28 2012] Skipping simple spatial due to low active detector fraction
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 05:16:43 2012] XMMSAS src. selection expression = ellipse(30679.191760, 9757.324000, 1571.598045, 1571.598045, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19_src.reg
[Mon May  7 05:16:43 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (263, 22) - (444, 203)
[Mon May  7 05:16:43 2012] XMMSAS bgd. selection expression = annulus(30679.191760, 9757.324000, 2619.330075, 5238.660151, X, Y) && !ellipse(27660.997345, 8927.451134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.056200, 11925.674000, 2082.440060, 759.820022, 256.406000, X, Y) && !ellipse(30362.954285, 12047.998001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.972600, 10818.720000, 1056.960030, 1056.960030, 0.000000, X, Y) && !ellipse(27487.000000, 9436.067131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31831.464264, 11256.135513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.244200, 11355.828000, 674.732819, 261.932808, 340.918600, X, Y) && !ellipse(30676.045959, 10636.581108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33839.991272, 11491.724228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32212.134399, 9908.692879, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19.gif
[Mon May  7 05:46:17 2012] Mean detx,y = (12544.11, -9954.91) 
[Mon May  7 05:46:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 05:48:30 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 05:48:31 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May  7 05:48:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon May  7 15:15:53 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:53 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May  7 15:15:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:56 2012] Using photon index=1.80, rate=0.0154, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src19.arf
[Mon May  7 15:15:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:56 2012] Updating source flux to 4.1e-12
[Mon May  7 15:16:17 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Mon May  7 15:16:17 2012] Flag c found in src. 19 procflags, skipping spectral fitting