[Thu May  3 13:41:02 2012] Detection parameters:
  Position = (352.1, 130.8) = 20 32 47.68 41 7 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 419.1 +/- 27.7
  Background counts = 69.1
  Rate = 0.01 +/- 0.0009

[Thu May  3 13:41:04 2012] Off-axis axis estimate = 12.76'
[Fri May  4 19:18:32 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:18:32 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Fri May  4 19:18:32 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.032
[Fri May  4 19:18:32 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.81"
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17.csv
[Sat May  5 03:26:56 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat May  5 03:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17.csv
[Sat May  5 03:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat May  5 03:26:57 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May  5 03:26:57 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat May  5 14:41:37 2012] Source 17 is offset by -0.484652 and 2.297378 pixels which is larger than
2 X fitted extent = 2.086349 x 2.086349, not incorporating fit results
[Sat May  5 14:41:37 2012] Warning, spatial fit 17 centroid is now closest to src. 14
[Sat May  5 14:41:37 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:37 2012] Assessing source extent using major
[Sat May  5 14:41:37 2012] Source does appear to be extended
[Sat May  5 14:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:37 2012] Source is confused with source 15
[Sun May  6 06:51:28 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Sun May  6 06:51:28 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Sun May  6 06:51:28 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.032
[Sun May  6 06:51:28 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.81"
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16.csv
[Sun May  6 09:51:22 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun May  6 09:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16.csv
[Sun May  6 09:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun May  6 09:51:23 2012] fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun May  6 09:51:23 2012] Fit fullrun_mos1_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun May  6 20:35:44 2012] Warning, spatial fit 16 centroid is now closest to src. 39
[Sun May  6 20:35:44 2012] Spatial fit model total counts = 737.656000, observed total counts = 701.000000
[Sun May  6 20:35:44 2012] Offset between fit and detection position for source 17 = 0.456502 pixels
[Sun May  6 20:35:44 2012] Warning, changing simple spatial fit ID from 16 to 32
[Sun May  6 20:35:44 2012] 685.065000 total counts/ 492.093000 bgd. counts: snr = 8.699028
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.456502 pixels
  Position = (352.4, 131.1) = 20 32 47.54 41 7 50.3
  Extent = 8.4 (7.2-10.7)", rotation angle = 341 (332-348) degrees
  Source counts = 193.0 +/- 26.2
  Background counts = 492.1
  Rate = 0.008 +/- 0.001
[Sun May  6 20:35:44 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:44 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:44 2012] Source does appear to be extended
[Sun May  6 20:35:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.95
[Sun May  6 20:35:44 2012] Source is asymmetric
[Mon May  7 05:16:43 2012] XMMSAS src. selection expression = ellipse(30613.244200, 11355.828000, 506.049615, 196.449606, 340.918600, X, Y)
[Mon May  7 05:16:43 2012] Writing source region out to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17_src.reg
[Mon May  7 05:16:43 2012] Extracting stamp from image fullrun_mos1_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (323, 102) - (382, 160)
[Mon May  7 05:16:43 2012] XMMSAS bgd. selection expression = annulus(30613.244200, 11355.828000, 843.416024, 1686.832049, X, Y) && !ellipse(31632.056200, 11925.674000, 2082.440060, 759.820022, 256.406000, X, Y) && !ellipse(30362.954285, 12047.998001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.972600, 10818.720000, 1056.960030, 1056.960030, 0.000000, X, Y) && !ellipse(30679.191760, 9757.324000, 2095.464060, 2095.464060, 0.000000, X, Y) && !ellipse(31831.464264, 11256.135513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.045959, 10636.581108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32212.134399, 9908.692879, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 05:16:43 2012] Writing fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17.gif
[Mon May  7 05:49:55 2012] Mean detx,y = (11672.54, -9343.99) 
[Mon May  7 05:49:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 05:50:15 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 05:50:15 2012] Setting source spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May  7 05:50:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May  7 15:15:53 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:53 2012] Error reading totcts from fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May  7 15:15:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:56 2012] Using photon index=1.80, rate=0.0079, arf fullrun_mos1_xmm0505110401_pi300-10000_pass1_cl_src17.arf
[Mon May  7 15:15:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:56 2012] Updating source flux to 3.3e-13
[Mon May  7 15:16:17 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Mon May  7 15:16:17 2012] Flag c found in src. 17 procflags, skipping spectral fitting