[Mon Mar 19 10:49:39 2012] Detection parameters:
  Position = (373.5, 98.8) = 20 32 39.98 41 5 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.8 +/- 28.8
  Background counts = 185.4
  Rate = 0.01 +/- 0.001

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 15.46'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Mon Mar 19 10:57:20 2012] source mask rpix=3.3, npix_max = 56, mask sum = 42, frac = 0.745
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 14.16"
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src95.ximg exists
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src95_1.ximg exists
[Mon Mar 19 18:45:02 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src95 appears to have run properly
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95.csv
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95.csv
[Mon Mar 19 18:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:41 2012] Source 96 is offset by 0.311365 and 3.577043 pixels which is larger than
2 X fitted extent = 1.465430 x 1.465430, not incorporating fit results
[Tue Mar 20 03:01:41 2012] Warning, spatial fit 95 centroid is now closest to src. 102
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:01:41 2012] Source is confused with source 5
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Tue Mar 20 03:02:48 2012] source mask rpix=3.3, npix_max = 56, mask sum = 42, frac = 0.745
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 90 for pass 1, mean size = 14.16"
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90.csv
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90_1.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90.csv
[Tue Mar 20 16:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:13 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90.ximg exists
[Tue Mar 20 16:07:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90.csv
[Tue Mar 20 16:07:13 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90_1.ximg exists
[Tue Mar 20 16:07:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90.csv
[Tue Mar 20 16:07:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:35 2012] Warning, spatial fit 90 centroid is now closest to src. 75
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:43 2012] XMMSAS src. selection expression = ellipse(32449.026733, 8547.140755, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 23:16:43 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96_src.reg
[Tue Mar 20 23:16:43 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (336, 61) - (411, 136)
[Tue Mar 20 23:16:43 2012] XMMSAS bgd. selection expression = annulus(32449.026733, 8547.140755, 1087.500000, 2175.000000, X, Y) && !ellipse(30940.993988, 7421.080437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32634.942505, 8958.233543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31929.479980, 6781.263512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.780579, 6993.900162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(31447.685089, 7098.036385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33507.711700, 10281.338852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(30764.084076, 10423.865471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.992035, 9918.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30294.645691, 10166.439804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.054800, 9747.822000, 1225.032035, 1225.032035, 0.000000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(30669.766815, 9348.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.125854, 9191.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31935.481400, 9002.162000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(31089.221800, 8849.943100, 278.942408, 278.942408, 0.000000, X, Y) && !ellipse(29917.608000, 8842.568000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(34299.880000, 9328.562000, 2222.088064, 2222.088064, 0.000000, X, Y) && !ellipse(31877.093597, 8483.588646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.834564, 8387.825058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.372864, 8389.522285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.087341, 7943.983147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.652283, 7785.396919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.131470, 7719.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.771881, 7423.389648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.493652, 7457.924278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.226837, 6587.775597, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:43 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96.gif
[Wed Mar 21 01:14:14 2012] Mean detx,y = (-10442.12, -14423.02) 
[Wed Mar 21 01:14:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 01:14:43 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 01:14:43 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Wed Mar 21 01:14:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Wed Mar 21 03:28:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 03:28:30 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:59 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:59 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Wed Mar 21 06:47:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:04 2012] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src96.arf
[Wed Mar 21 06:47:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:04 2012] Updating source flux to 2.2e-13
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting