[Mon Mar 19 10:49:38 2012] Detection parameters:
  Position = (364.4, 109.9) = 20 32 43.50 41 6 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.2 +/- 29.9
  Background counts = 184.6
  Rate = 0.008 +/- 0.001

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 14.48'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 13.67"
[Mon Mar 19 10:57:20 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.055
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 13.67"
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83.ximg exists
[Mon Mar 19 18:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83.csv
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83_1.ximg exists
[Mon Mar 19 18:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83.csv
[Mon Mar 19 18:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Mon Mar 19 18:45:06 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Tue Mar 20 03:01:41 2012] Warning, spatial fit 83 centroid is now closest to src. 5
[Tue Mar 20 03:01:41 2012] Spatial fit model total counts = 2187.230000, observed total counts = 2185.000000
[Tue Mar 20 03:01:41 2012] Offset between fit and detection position for source 84 = 3.757585 pixels
[Tue Mar 20 03:01:41 2012] Warning, changing simple spatial fit ID from 83 to 88
[Tue Mar 20 03:01:41 2012] 1990.625000 total counts/ 954.065000 bgd. counts: snr = 33.558726
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 3.757585 pixels
  Position = (360.8, 108.7) = 20 32 44.87 41 6 16.7
  Extent = 27.7 (27.6-55.4)", rotation angle = 0
  Source counts = 1036.6 +/- 44.6
  Background counts = 954.1
  Rate = 0.1 +/- 0.005
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:01:41 2012] Source is confused with source 5
[Tue Mar 20 03:02:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 27.68"
[Tue Mar 20 03:02:48 2012] source mask rpix=6.4, npix_max = 188, mask sum = 196, frac = 1.040
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 27.68"
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78.csv
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78_1.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78.csv
[Tue Mar 20 16:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Tue Mar 20 16:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:35 2012] Warning, spatial fit 78 centroid is now closest to src. 68
[Tue Mar 20 23:15:35 2012] Spatial fit model total counts = 1913.800000, observed total counts = 1538.000000
[Tue Mar 20 23:15:35 2012] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:15:35 2012] Source 84 is offset by 2.065494 and -1.991862 pixels which is larger than
2 X fitted extent = 1.613264 x 1.613264, not incorporating fit results
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:42 2012] Counts = 1036.560000, rescaling region sizes by 2.000000
[Tue Mar 20 23:16:42 2012] XMMSAS src. selection expression = ellipse(31343.574000, 9407.898000, 3321.996096, 3321.996096, 0.000000, X, Y)
[Tue Mar 20 23:16:42 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84_src.reg
[Tue Mar 20 23:16:42 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (170, 0) - (552, 300)
[Tue Mar 20 23:16:42 2012] XMMSAS bgd. selection expression = annulus(31343.574000, 9407.898000, 11073.320319, 22146.640637, X, Y) && !ellipse(30940.993988, 7421.080437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36417.751251, 23859.486572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.824738, 20032.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32233.555176, 19258.563736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32634.942505, 8958.233543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27950.183136, 7573.965652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.038800, 24457.856200, 1430.299241, 1430.299241, 0.000000, X, Y) && !ellipse(31929.479980, 6781.263512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16507.537872, 31968.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14724.243637, 31643.881134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.910000, 32575.466000, 1702.496049, 1702.496049, 0.000000, X, Y) && !ellipse(31373.934600, 31114.688000, 1113.152032, 491.048014, 5.953570, X, Y) && !ellipse(27037.059800, 30820.300500, 346.975210, 346.975210, 0.000000, X, Y) && !ellipse(39276.755829, 29561.339874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24732.640640, 26295.725020, 477.964814, 477.964814, 0.000000, X, Y) && !ellipse(14119.287247, 26066.665527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.642944, 25467.239563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.120834, 25276.520844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.250153, 24833.927460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.973000, 23033.309800, 1272.544037, 1272.544037, 0.000000, X, Y) && !ellipse(27589.072601, 22542.618591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30938.862000, 22067.916611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27928.860596, 21861.092484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33596.806519, 21343.479919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.780579, 6993.900162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.002655, 20878.997147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.521881, 20730.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22281.643200, 20636.693400, 1116.576032, 1116.576032, 0.000000, X, Y) && !ellipse(41702.491486, 20153.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40588.222000, 20217.496600, 2115.496061, 2115.496061, 0.000000, X, Y) && !ellipse(29101.114441, 20187.721771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42221.034637, 19883.318680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42038.057983, 19250.630508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35637.735504, 18771.161423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40971.203491, 18664.338974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.984589, 18823.753571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41775.093262, 18301.841187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.992371, 17435.316620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.745148, 16147.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.403580, 15274.261800, 423.097612, 423.097612, 0.000000, X, Y) && !ellipse(15499.668000, 14667.851600, 369.723211, 369.723211, 0.000000, X, Y) && !ellipse(31046.403961, 14056.221008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.316559, 13493.045486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.158508, 13521.212692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.349640, 12961.261703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.721527, 12834.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22618.756000, 12939.068000, 347.891210, 347.891210, 0.000000, X, Y) && !ellipse(22260.821747, 12198.212921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y) && !ellipse(27805.900879, 12043.140625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(31447.685089, 7098.036385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35542.704041, 11284.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18387.759262, 11332.342819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(29266.559937, 10928.752480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33507.711700, 10281.338852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(30764.084076, 10423.865471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.992035, 9918.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27227.921800, 10002.494000, 1373.040040, 259.264807, 94.847000, X, Y) && !ellipse(30294.645691, 10166.439804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.451172, 9980.172241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.736725, 10228.190475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.054800, 9747.822000, 1225.032035, 1225.032035, 0.000000, X, Y) && !ellipse(30669.766815, 9348.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.125854, 9191.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36074.912628, 9188.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31935.481400, 9002.162000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(29320.467651, 9519.409164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.221800, 8849.943100, 278.942408, 278.942408, 0.000000, X, Y) && !ellipse(28209.470642, 8824.154564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.462341, 8994.866310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.608000, 8842.568000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(34299.880000, 9328.562000, 2222.088064, 2222.088064, 0.000000, X, Y) && !ellipse(32449.026733, 8547.140755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.093597, 8483.588646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36249.964020, 8652.088753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.834564, 8387.825058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.372864, 8389.522285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.939301, 7953.265793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.087341, 7943.983147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.532898, 7861.174110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.647583, 7838.168282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.652283, 7785.396919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.131470, 7719.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29060.383636, 7791.261215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.771881, 7423.389648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.355011, 7436.103256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.493652, 7457.924278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.226837, 6587.775597, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:42 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84.gif
[Wed Mar 21 00:38:22 2012] Mean detx,y = (-9588.35, -13919.53) 
[Wed Mar 21 00:38:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 00:49:02 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 00:49:03 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Wed Mar 21 00:49:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Wed Mar 21 06:46:58 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:58 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Wed Mar 21 06:47:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:03 2012] Using photon index=1.80, rate=0.12, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src84.arf
[Wed Mar 21 06:47:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:03 2012] Updating source flux to 8.1e-13
[Wed Mar 21 06:57:14 2012] Flag b found in src. 84 procflags, skipping spectral fitting
[Wed Mar 21 06:57:14 2012] Flag p found in src. 84 procflags, skipping spectral fitting
[Wed Mar 21 06:57:14 2012] Flag c found in src. 84 procflags, skipping spectral fitting