[Mon Mar 19 10:49:37 2012] Detection parameters:
  Position = (385.7, 118.7) = 20 32 35.29 41 6 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651.2 +/- 68.3
  Background counts = 181.4
  Rate = 0.02 +/- 0.002

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 14.48'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 13.67"
[Mon Mar 19 10:57:20 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.923
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 13.67"
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src74.ximg exists
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src74_1.ximg exists
[Mon Mar 19 18:45:02 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src74 appears to have run properly
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74.csv
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74.csv
[Mon Mar 19 18:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:41 2012] Warning, spatial fit 74 centroid is now closest to src. 83
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:01:41 2012] Source is confused with source 83
[Tue Mar 20 03:01:41 2012] Source is confused with source 95
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 13.67"
[Tue Mar 20 03:02:48 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.923
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 13.67"
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69.csv
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69.csv
[Tue Mar 20 16:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Tue Mar 20 16:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:35 2012] Warning, spatial fit 69 centroid is now closest to src. 65
[Tue Mar 20 23:15:35 2012] Source 75 is offset by -0.317544 and 5.712653 pixels which is larger than
2 X fitted extent = 1.627641 x 1.627641, not incorporating fit results
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:41 2012] XMMSAS src. selection expression = ellipse(33507.711700, 10281.338852, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 23:16:41 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75_src.reg
[Tue Mar 20 23:16:41 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (348, 81) - (423, 156)
[Tue Mar 20 23:16:41 2012] XMMSAS bgd. selection expression = annulus(33507.711700, 10281.338852, 1087.500000, 2175.000000, X, Y) && !ellipse(30940.993988, 7421.080437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32634.942505, 8958.233543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.349640, 12961.261703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(35542.704041, 11284.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(30764.084076, 10423.865471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.451172, 9980.172241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.054800, 9747.822000, 1225.032035, 1225.032035, 0.000000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(30669.766815, 9348.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.125854, 9191.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36074.912628, 9188.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31935.481400, 9002.162000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(31089.221800, 8849.943100, 278.942408, 278.942408, 0.000000, X, Y) && !ellipse(34299.880000, 9328.562000, 2222.088064, 2222.088064, 0.000000, X, Y) && !ellipse(32449.026733, 8547.140755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.093597, 8483.588646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36249.964020, 8652.088753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.834564, 8387.825058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.372864, 8389.522285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.087341, 7943.983147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.131470, 7719.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.771881, 7423.389648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.493652, 7457.924278, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:41 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75.gif
[Wed Mar 21 00:29:02 2012] Mean detx,y = (-11377.39, -12671.60) 
[Wed Mar 21 00:29:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 00:29:38 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 00:29:38 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed Mar 21 00:29:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Wed Mar 21 02:56:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 02:56:30 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:57 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:58 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed Mar 21 06:47:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:03 2012] Using photon index=1.80, rate=0.0228, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src75.arf
[Wed Mar 21 06:47:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:03 2012] Updating source flux to 3.9e-13
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting