[Mon Mar 19 10:49:37 2012] Detection parameters:
  Position = (337.0, 126.2) = 20 32 54.05 41 7 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 556.6 +/- 34.9
  Background counts = 150.7
  Rate = 0.02 +/- 0.001

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 12.80'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Mon Mar 19 10:57:20 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.883
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 12.83"
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72.ximg exists
[Mon Mar 19 18:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72.csv
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon Mar 19 18:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72.csv
[Mon Mar 19 18:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:05 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Mar 19 18:45:06 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Mar 19 18:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Mar 19 18:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:41 2012] Warning, spatial fit 72 centroid is now closest to src. 82
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Tue Mar 20 03:02:48 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.883
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 12.83"
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67.csv
[Tue Mar 20 16:07:10 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67_1.ximg exists
[Tue Mar 20 16:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67.csv
[Tue Mar 20 16:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67.csv
[Tue Mar 20 16:07:12 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Mar 20 16:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67.csv
[Tue Mar 20 16:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:35 2012] Spatial fit model total counts = 1568.280000, observed total counts = 1404.000000
[Tue Mar 20 23:15:35 2012] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:15:35 2012] Source 73 is offset by 4.035585 and 2.983845 pixels which is larger than
2 X fitted extent = 3.645508 x 12.006115, not incorporating fit results
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:41 2012] XMMSAS src. selection expression = ellipse(29266.559937, 10928.752480, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 23:16:41 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73_src.reg
[Tue Mar 20 23:16:41 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (299, 89) - (374, 164)
[Tue Mar 20 23:16:41 2012] XMMSAS bgd. selection expression = annulus(29266.559937, 10928.752480, 1087.500000, 2175.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.316559, 13493.045486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.721527, 12834.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.900879, 12043.140625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(30764.084076, 10423.865471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.992035, 9918.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27227.921800, 10002.494000, 1373.040040, 259.264807, 94.847000, X, Y) && !ellipse(30294.645691, 10166.439804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.736725, 10228.190475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(30669.766815, 9348.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.125854, 9191.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31935.481400, 9002.162000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(29320.467651, 9519.409164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.221800, 8849.943100, 278.942408, 278.942408, 0.000000, X, Y) && !ellipse(28209.470642, 8824.154564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.462341, 8994.866310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.608000, 8842.568000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(31877.093597, 8483.588646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.372864, 8389.522285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.939301, 7953.265793, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:41 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73.gif
[Wed Mar 21 00:27:00 2012] Mean detx,y = (-6923.83, -12677.76) 
[Wed Mar 21 00:27:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 00:27:38 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 00:27:39 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Mar 21 00:27:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Mar 21 02:55:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 02:55:59 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:57 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:57 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Mar 21 06:47:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:03 2012] Using photon index=1.80, rate=0.0195, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src73.arf
[Wed Mar 21 06:47:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:03 2012] Updating source flux to 1.5e-13
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting