[Mon Mar 19 10:49:33 2012] Detection parameters:
  Position = (282.4, 281.8) = 20 33 15.05 41 18 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29082.9 +/- 204.1
  Background counts = 155.0
  Rate = 1 +/- 0.008

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 1.67'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Mar 19 10:57:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.26"
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7.csv
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7.csv
[Mon Mar 19 18:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:03 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Mar 19 18:45:03 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Mar 19 18:45:03 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Mar 20 03:01:40 2012] Spatial fit model total counts = 15252.300000, observed total counts = 15176.000000
[Tue Mar 20 03:01:40 2012] Offset between fit and detection position for source 7 = 0.152535 pixels
[Tue Mar 20 03:01:40 2012] 15255.700000 total counts/ 4017.700000 bgd. counts: snr = 177.296546
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.152535 pixels
  Position = (282.4, 281.7) = 20 33 15.06 41 18 49.3
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 11238.0 +/- 123.5
  Background counts = 4017.7
  Rate = 1 +/- 0.01
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:02:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 5.96"
[Tue Mar 20 03:02:48 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.858
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.96"
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7.csv
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7.csv
[Tue Mar 20 16:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 20 16:07:11 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Mar 20 23:15:34 2012] Spatial fit model total counts = 15252.200000, observed total counts = 15176.000000
[Tue Mar 20 23:15:34 2012] Offset between fit and detection position for source 7 = 0.000015 pixels
[Tue Mar 20 23:15:34 2012] 15255.600000 total counts/ 4016.500000 bgd. counts: snr = 177.340386
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000015 pixels
  Position = (282.4, 281.7) = 20 33 15.06 41 18 49.3
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 11239.1 +/- 123.5
  Background counts = 4016.5
  Rate = 1 +/- 0.01
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:38 2012] Counts = 11239.100000, rescaling region sizes by 3.000000
[Tue Mar 20 23:16:38 2012] XMMSAS src. selection expression = ellipse(24523.038800, 24457.856200, 1072.724431, 1072.724431, 0.000000, X, Y)
[Tue Mar 20 23:16:38 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_src.reg
[Tue Mar 20 23:16:38 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (221, 220) - (344, 343)
[Tue Mar 20 23:16:38 2012] XMMSAS bgd. selection expression = annulus(24523.038800, 24457.856200, 5363.622154, 10727.244309, X, Y) && !ellipse(25499.824738, 20032.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32233.555176, 19258.563736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30545.721191, 35157.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.211212, 34587.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14431.655426, 34097.473358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18629.017792, 33208.073059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16507.537872, 31968.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14724.243637, 31643.881134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.910000, 32575.466000, 1702.496049, 1702.496049, 0.000000, X, Y) && !ellipse(31373.934600, 31114.688000, 1113.152032, 491.048014, 5.953570, X, Y) && !ellipse(27037.059800, 30820.300500, 346.975210, 346.975210, 0.000000, X, Y) && !ellipse(24732.640640, 26295.725020, 477.964814, 477.964814, 0.000000, X, Y) && !ellipse(14119.287247, 26066.665527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.642944, 25467.239563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.120834, 25276.520844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.250153, 24833.927460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.973000, 23033.309800, 1272.544037, 1272.544037, 0.000000, X, Y) && !ellipse(27589.072601, 22542.618591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30938.862000, 22067.916611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27928.860596, 21861.092484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33596.806519, 21343.479919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.002655, 20878.997147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.521881, 20730.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22281.643200, 20636.693400, 1116.576032, 1116.576032, 0.000000, X, Y) && !ellipse(29101.114441, 20187.721771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35637.735504, 18771.161423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.984589, 18823.753571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.992371, 17435.316620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.745148, 16147.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.403580, 15274.261800, 423.097612, 423.097612, 0.000000, X, Y) && !ellipse(15499.668000, 14667.851600, 369.723211, 369.723211, 0.000000, X, Y) && !ellipse(31046.403961, 14056.221008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.316559, 13493.045486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.158508, 13521.212692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.349640, 12961.261703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y)
[Tue Mar 20 23:16:38 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7.gif
[Tue Mar 20 23:33:57 2012] Mean detx,y = (68.15, -191.82) 
[Tue Mar 20 23:34:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 23:38:13 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 23:38:14 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar 20 23:38:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar 21 06:46:53 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:53 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 21 06:47:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:00 2012] Using photon index=1.80, rate=1.3, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7.arf
[Wed Mar 21 06:47:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:00 2012] Updating source flux to 3.1e-12
[Wed Mar 21 07:05:09 2012] Reading fit data from xmm0505110301/analysis//spectral/fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_pl.csv
[Wed Mar 21 07:05:09 2012] Spectral fit parameter nH value = 9.55795e+21
[Wed Mar 21 07:05:09 2012] Spectral fit parameter PhoIndex value = 3.71578
[Wed Mar 21 07:05:09 2012] Failed to get F(0.3-8.0) from xmm0505110301/analysis//spectral/fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 07:05:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 07:05:09 2012] Using Nh = 9.6e+21, photon index=3.72, rate=1.3, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src7.arf
[Wed Mar 21 07:05:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 07:05:09 2012] Updating source flux to 3.5e-12