[Mon Mar 19 10:49:33 2012] Detection parameters:
  Position = (321.8, 87.6) = 20 32 59.88 41 4 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1949.2 +/- 666.2
  Background counts = 85.2
  Rate = 0.07 +/- 0.02

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 15.38'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Mon Mar 19 10:57:20 2012] source mask rpix=3.2, npix_max = 56, mask sum = 37, frac = 0.659
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 14.12"
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6.csv
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6.csv
[Mon Mar 19 18:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:03 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Mar 19 18:45:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Mar 19 18:45:03 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Mar 19 18:45:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Mar 19 18:45:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:40 2012] Warning, spatial fit 6 centroid is now closest to src. 107
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:01:41 2012] Source is confused with source 103
[Tue Mar 20 03:01:41 2012] Source is confused with source 109
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Tue Mar 20 03:02:48 2012] source mask rpix=3.2, npix_max = 56, mask sum = 37, frac = 0.659
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.12"
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6.csv
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6.csv
[Tue Mar 20 16:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Mar 20 16:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:34 2012] Warning, spatial fit 6 centroid is now closest to src. 103
[Tue Mar 20 23:15:35 2012] Spatial fit model total counts = 2514.150000, observed total counts = 1853.000000
[Tue Mar 20 23:15:35 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:15:35 2012] Spatial fit model total counts = 2539.160000, observed total counts = 1870.000000
[Tue Mar 20 23:15:35 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:38 2012] Counts = 1949.155640, rescaling region sizes by 2.000000
[Tue Mar 20 23:16:38 2012] XMMSAS src. selection expression = ellipse(27950.183136, 7573.965652, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:38 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 20 23:16:38 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (247, 13) - (397, 163)
[Tue Mar 20 23:16:38 2012] XMMSAS bgd. selection expression = annulus(27950.183136, 7573.965652, 4350.000000, 8700.000000, X, Y) && !ellipse(30940.993988, 7421.080437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32634.942505, 8958.233543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31929.479980, 6781.263512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.780579, 6993.900162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.745148, 16147.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.403580, 15274.261800, 423.097612, 423.097612, 0.000000, X, Y) && !ellipse(31046.403961, 14056.221008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.316559, 13493.045486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.158508, 13521.212692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.349640, 12961.261703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.721527, 12834.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22618.756000, 12939.068000, 347.891210, 347.891210, 0.000000, X, Y) && !ellipse(22260.821747, 12198.212921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y) && !ellipse(27805.900879, 12043.140625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(31447.685089, 7098.036385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35542.704041, 11284.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18387.759262, 11332.342819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(29266.559937, 10928.752480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33507.711700, 10281.338852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(30764.084076, 10423.865471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.992035, 9918.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27227.921800, 10002.494000, 1373.040040, 259.264807, 94.847000, X, Y) && !ellipse(30294.645691, 10166.439804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.451172, 9980.172241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.736725, 10228.190475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.054800, 9747.822000, 1225.032035, 1225.032035, 0.000000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(30669.766815, 9348.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.125854, 9191.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36074.912628, 9188.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31935.481400, 9002.162000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(29320.467651, 9519.409164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.221800, 8849.943100, 278.942408, 278.942408, 0.000000, X, Y) && !ellipse(28209.470642, 8824.154564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.462341, 8994.866310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.608000, 8842.568000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(34299.880000, 9328.562000, 2222.088064, 2222.088064, 0.000000, X, Y) && !ellipse(32449.026733, 8547.140755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.093597, 8483.588646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36249.964020, 8652.088753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.834564, 8387.825058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.372864, 8389.522285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.939301, 7953.265793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.087341, 7943.983147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.532898, 7861.174110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.647583, 7838.168282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.652283, 7785.396919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.131470, 7719.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29060.383636, 7791.261215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.771881, 7423.389648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.355011, 7436.103256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.493652, 7457.924278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.226837, 6587.775597, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:38 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6.gif
[Tue Mar 20 23:31:46 2012] Mean detx,y = (-6348.38, -15903.92) 
[Tue Mar 20 23:31:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 23:33:37 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 23:33:38 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 20 23:33:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar 21 01:30:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 01:30:19 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:53 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:53 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 21 06:47:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:00 2012] Using photon index=1.80, rate=0.0684, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6.arf
[Wed Mar 21 06:47:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:00 2012] Updating source flux to 6.5e-13
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 07:05:09 2012] xmm0505110301/analysis//spectral/fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete