[Mon Mar 19 10:49:36 2012] Detection parameters:
  Position = (336.3, 155.6) = 20 32 54.30 41 9 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.1 +/- 22.2
  Background counts = 144.5
  Rate = 0.006 +/- 0.0008

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 10.71'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Mon Mar 19 10:57:20 2012] source mask rpix=2.7, npix_max = 41, mask sum = 38, frac = 0.923
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 11.78"
[Mon Mar 19 18:45:01 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58.ximg exists
[Mon Mar 19 18:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58.csv
[Mon Mar 19 18:45:01 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58_1.ximg exists
[Mon Mar 19 18:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58.csv
[Mon Mar 19 18:45:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:05 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Mon Mar 19 18:45:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Mar 19 18:45:05 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Mon Mar 19 18:45:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Mar 19 18:45:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:41 2012] Warning, spatial fit 58 centroid is now closest to src. 58
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:01:41 2012] Source is confused with source 58
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Tue Mar 20 03:02:48 2012] source mask rpix=2.7, npix_max = 41, mask sum = 38, frac = 0.923
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 11.78"
[Tue Mar 20 16:07:09 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src53.ximg exists
[Tue Mar 20 16:07:09 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src53_1.ximg exists
[Tue Mar 20 16:07:09 2012] Fit fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src53 appears to have run properly
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue Mar 20 16:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:35 2012] Warning, spatial fit 53 centroid is now closest to src. 58
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:40 2012] XMMSAS src. selection expression = ellipse(29208.316559, 13493.045486, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 23:16:40 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59_src.reg
[Tue Mar 20 23:16:40 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (299, 118) - (374, 193)
[Tue Mar 20 23:16:40 2012] XMMSAS bgd. selection expression = annulus(29208.316559, 13493.045486, 1087.500000, 2175.000000, X, Y) && !ellipse(27500.403580, 15274.261800, 423.097612, 423.097612, 0.000000, X, Y) && !ellipse(31046.403961, 14056.221008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.721527, 12834.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.900879, 12043.140625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(29266.559937, 10928.752480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(27227.921800, 10002.494000, 1373.040040, 259.264807, 94.847000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y)
[Tue Mar 20 23:16:40 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59.gif
[Wed Mar 21 00:15:18 2012] Mean detx,y = (-6568.02, -10169.35) 
[Wed Mar 21 00:15:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 00:15:50 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 00:15:51 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Mar 21 00:15:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Wed Mar 21 02:36:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 02:36:42 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:56 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:56 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Mar 21 06:47:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:02 2012] Using photon index=1.80, rate=0.00621, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src59.arf
[Wed Mar 21 06:47:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:02 2012] Updating source flux to 3.7e-14
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting