[Mon Mar 19 10:49:32 2012] Detection parameters:
  Position = (293.7, 230.8) = 20 33 10.72 41 15 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4818.7 +/- 83.9
  Background counts = 145.5
  Rate = 0.3 +/- 0.005

[Mon Mar 19 10:49:41 2012] Off-axis axis estimate = 4.91'
[Mon Mar 19 10:57:20 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 10:57:20 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Mon Mar 19 10:57:20 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Mon Mar 19 10:57:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.89"
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3.csv
[Mon Mar 19 18:45:00 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Mar 19 18:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3.csv
[Mon Mar 19 18:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:45:02 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Mar 19 18:45:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 19 18:45:03 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Mar 19 18:45:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 19 18:45:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:40 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.962122 pixels away
[Tue Mar 20 03:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:41 2012] Assessing source extent using major
[Tue Mar 20 03:01:41 2012] Source does appear to be extended
[Tue Mar 20 03:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:02:48 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 03:02:48 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Mar 20 03:02:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Tue Mar 20 03:02:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.89"
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3.csv
[Tue Mar 20 16:07:08 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 20 16:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3.csv
[Tue Mar 20 16:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 20 16:07:11 2012] fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 20 16:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 20 16:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:34 2012] Warning, spatial fit 3 centroid is now closest to src. 40
[Tue Mar 20 23:15:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:35 2012] Assessing source extent using major
[Tue Mar 20 23:15:35 2012] Source does appear to be extended
[Tue Mar 20 23:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:37 2012] Counts = 4818.693359, rescaling region sizes by 2.000000
[Tue Mar 20 23:16:37 2012] XMMSAS src. selection expression = ellipse(25499.824738, 20032.171570, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 20 23:16:37 2012] Writing source region out to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 20 23:16:37 2012] Extracting stamp from image fullrun_pn_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (219, 156) - (369, 306)
[Tue Mar 20 23:16:37 2012] XMMSAS bgd. selection expression = annulus(25499.824738, 20032.171570, 4350.000000, 8700.000000, X, Y) && !ellipse(32233.555176, 19258.563736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.038800, 24457.856200, 1430.299241, 1430.299241, 0.000000, X, Y) && !ellipse(24732.640640, 26295.725020, 477.964814, 477.964814, 0.000000, X, Y) && !ellipse(28074.642944, 25467.239563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.120834, 25276.520844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.250153, 24833.927460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.973000, 23033.309800, 1272.544037, 1272.544037, 0.000000, X, Y) && !ellipse(27589.072601, 22542.618591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30938.862000, 22067.916611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27928.860596, 21861.092484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33596.806519, 21343.479919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.002655, 20878.997147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.521881, 20730.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22281.643200, 20636.693400, 1116.576032, 1116.576032, 0.000000, X, Y) && !ellipse(29101.114441, 20187.721771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.984589, 18823.753571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.992371, 17435.316620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.745148, 16147.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.403580, 15274.261800, 423.097612, 423.097612, 0.000000, X, Y) && !ellipse(31046.403961, 14056.221008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.077332, 13784.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29208.316559, 13493.045486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.158508, 13521.212692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.349640, 12961.261703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.721527, 12834.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22618.756000, 12939.068000, 347.891210, 347.891210, 0.000000, X, Y) && !ellipse(22260.821747, 12198.212921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34742.390000, 12039.324000, 2075.824060, 2075.824060, 0.000000, X, Y) && !ellipse(27805.900879, 12043.140625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31817.587000, 11458.242000, 493.442414, 493.442414, 0.000000, X, Y) && !ellipse(30627.386000, 11648.449400, 1045.240030, 1045.240030, 0.000000, X, Y) && !ellipse(18387.759262, 11332.342819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.102560, 10697.205600, 671.678419, 671.678419, 0.000000, X, Y) && !ellipse(29266.559937, 10928.752480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.879578, 10821.347252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.524000, 10561.543400, 2133.264061, 559.344016, 0.000000, X, Y) && !ellipse(27227.921800, 10002.494000, 1373.040040, 259.264807, 94.847000, X, Y) && !ellipse(31343.574000, 9407.898000, 2214.664064, 2214.664064, 0.000000, X, Y) && !ellipse(34299.880000, 9328.562000, 2222.088064, 2222.088064, 0.000000, X, Y)
[Tue Mar 20 23:16:37 2012] Writing fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3.gif
[Tue Mar 20 23:21:41 2012] Mean detx,y = (-1587.19, -4382.05) 
[Tue Mar 20 23:21:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 23:25:33 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 23:25:33 2012] Setting source spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 20 23:25:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Mar 21 01:29:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 01:29:04 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:46:53 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:46:53 2012] Error reading totcts from fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 21 06:47:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:00 2012] Using photon index=1.80, rate=0.26, arf fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3.arf
[Wed Mar 21 06:47:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:00 2012] Updating source flux to 8.2e-13
[Wed Mar 21 06:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 07:05:09 2012] xmm0505110301/analysis//spectral/fullrun_pn_xmm0505110301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete