[Mon Mar 19 10:51:17 2012] Detection parameters:
  Position = (318.7, 96.0) = 20 33 1.10 41 5 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1395.2 +/- 48.4
  Background counts = 62.6
  Rate = 0.05 +/- 0.002

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 14.75'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 13.80"
[Mon Mar 19 20:51:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.889
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.80"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 20 03:01:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 7 centroid is now closest to src. 64
[Tue Mar 20 03:02:14 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.688432 pixels away
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 3196.220000, observed total counts = 3161.000000
[Tue Mar 20 03:02:14 2012] Offset between fit and detection position for source 8 = 4.254379 pixels
[Tue Mar 20 03:02:14 2012] Warning, changing simple spatial fit ID from 7 to 16
[Tue Mar 20 03:02:14 2012] 1232.857000 total counts/ 222.887000 bgd. counts: snr = 67.649736
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.254379 pixels
  Position = (317.1, 100.0) = 20 33 1.68 41 5 38.9
  Extent = 27.3 (27.2-54.5)", rotation angle = 86 (85-86) degrees
  Source counts = 1010.0 +/- 35.1
  Background counts = 222.9
  Rate = 0.05 +/- 0.002
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.82
[Tue Mar 20 03:02:14 2012] Source is asymmetric
[Tue Mar 20 03:02:14 2012] Source is confused with source 7
[Tue Mar 20 18:36:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 15.34"
[Tue Mar 20 18:36:10 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.987
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 15.34"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 20 23:14:59 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Mar 20 23:16:04 2012] Warning, spatial fit 7 centroid is now closest to src. 65
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.82
[Tue Mar 20 23:16:04 2012] Source is asymmetric
[Wed Mar 21 04:53:08 2012] Counts = 1009.970000, rescaling region sizes by 2.000000
[Wed Mar 21 04:53:08 2012] XMMSAS src. selection expression = ellipse(27543.066000, 8650.524800, 3271.512094, 408.939612, 85.768060, X, Y)
[Wed Mar 21 04:53:08 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8_src.reg
[Wed Mar 21 04:53:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (129, 0) - (505, 288)
[Wed Mar 21 04:53:08 2012] XMMSAS bgd. selection expression = annulus(27543.066000, 8650.524800, 10905.040314, 21810.080628, X, Y) && !ellipse(24530.236400, 24458.424200, 392.196811, 392.196811, 0.000000, X, Y) && !ellipse(36431.225525, 23862.454895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32249.474800, 19253.572000, 507.232815, 507.232815, 0.000000, X, Y) && !ellipse(25513.511414, 20032.703903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30893.580400, 10531.236000, 527.944015, 527.944015, 0.000000, X, Y) && !ellipse(27827.184000, 9138.394600, 547.394416, 547.394416, 0.000000, X, Y) && !ellipse(26432.042000, 9222.626000, 877.520025, 877.520025, 0.000000, X, Y) && !ellipse(26949.412323, 8137.600494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29548.336000, 9536.618000, 1197.240034, 1197.240034, 0.000000, X, Y) && !ellipse(29602.625580, 8829.799820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31853.620000, 10370.046000, 563.201616, 563.201616, 0.000000, X, Y) && !ellipse(27916.599670, 8654.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34383.005829, 18825.095688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 8651.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24818.166000, 26268.341400, 380.418411, 380.418411, 0.000000, X, Y) && !ellipse(30397.782959, 11439.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28821.864000, 10595.634000, 396.340011, 396.340011, 0.000000, X, Y) && !ellipse(29970.400238, 10181.576790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.741200, 14373.231400, 861.564381, 861.564381, 0.000000, X, Y) && !ellipse(22702.488000, 13163.652000, 572.067216, 572.067216, 0.000000, X, Y) && !ellipse(31641.783661, 11251.404251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28726.603973, 13893.832779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.010280, 12204.857200, 397.788811, 397.788811, 0.000000, X, Y) && !ellipse(34326.228027, 12485.731354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.239800, 10407.474000, 917.944026, 917.944026, 0.000000, X, Y) && !ellipse(30960.256226, 12455.805191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.273102, 12923.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.456390, 11857.945694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.994171, 17941.455475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31707.333679, 14061.014664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32993.092800, 13563.786000, 1248.616036, 1248.616036, 0.000000, X, Y) && !ellipse(25006.130005, 16138.545883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.739400, 15200.595400, 355.016810, 355.016810, 0.000000, X, Y) && !ellipse(32049.705017, 12930.787277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32174.090485, 12159.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.981018, 24965.539917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.983673, 12223.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.882019, 12157.565750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.162781, 12122.445023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25628.752960, 20658.289871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.581787, 24378.215576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34377.799316, 11264.262558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32170.744600, 12370.280600, 734.824021, 734.824021, 0.000000, X, Y) && !ellipse(15471.398087, 14713.365982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.561707, 11185.097549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.820465, 17369.664383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16132.572067, 29780.682465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19137.865400, 25294.526000, 477.402414, 477.402414, 0.000000, X, Y) && !ellipse(14752.834320, 26927.479126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18370.544052, 11290.030945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21810.498400, 26082.882400, 456.082413, 456.082413, 0.000000, X, Y) && !ellipse(23725.293427, 24768.372131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.298000, 26814.438000, 1074.672031, 1074.672031, -0.000000, X, Y) && !ellipse(22917.275085, 23085.001251, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8.gif
[Wed Mar 21 05:02:00 2012] Mean detx,y = (5936.31, 14688.35) 
[Wed Mar 21 05:02:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:07:52 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:07:52 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar 21 05:07:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Mar 21 06:47:07 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:08 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar 21 06:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:10 2012] Using photon index=1.80, rate=0.0479, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src8.arf
[Wed Mar 21 06:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:10 2012] Updating source flux to 1.5e-12
[Wed Mar 21 06:52:15 2012] Flag c found in src. 8 procflags, skipping spectral fitting