[Mon Mar 19 10:51:19 2012] Detection parameters:
  Position = (340.8, 102.0) = 20 32 52.57 41 5 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 996.7 +/- 42.0
  Background counts = 61.3
  Rate = 0.03 +/- 0.001

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 14.57'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Mon Mar 19 20:51:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.918
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.71"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Mar 20 03:01:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 12 centroid is now closest to src. 61
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 18:36:10 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Tue Mar 20 18:36:10 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.918
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.71"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Mar 20 23:14:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Mar 20 23:14:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Mar 20 23:14:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:16:04 2012] Warning, spatial fit 12 centroid is now closest to src. 63
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 23:16:04 2012] Source is confused with source 64
[Wed Mar 21 04:53:08 2012] XMMSAS src. selection expression = ellipse(29602.625580, 8829.799820, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66_src.reg
[Wed Mar 21 04:53:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (303, 65) - (378, 140)
[Wed Mar 21 04:53:08 2012] XMMSAS bgd. selection expression = annulus(29602.625580, 8829.799820, 1087.500000, 2175.000000, X, Y) && !ellipse(30893.580400, 10531.236000, 527.944015, 527.944015, 0.000000, X, Y) && !ellipse(27827.184000, 9138.394600, 547.394416, 547.394416, 0.000000, X, Y) && !ellipse(27543.066000, 8650.524800, 2181.008063, 272.626408, 85.768060, X, Y) && !ellipse(26949.412323, 8137.600494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29548.336000, 9536.618000, 1197.240034, 1197.240034, 0.000000, X, Y) && !ellipse(31853.620000, 10370.046000, 563.201616, 563.201616, 0.000000, X, Y) && !ellipse(27916.599670, 8654.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 8651.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30397.782959, 11439.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28821.864000, 10595.634000, 396.340011, 396.340011, 0.000000, X, Y) && !ellipse(29970.400238, 10181.576790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.783661, 11251.404251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.239800, 10407.474000, 917.944026, 917.944026, 0.000000, X, Y) && !ellipse(29411.561707, 11185.097549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66.gif
[Wed Mar 21 05:10:40 2012] Mean detx,y = (7918.74, 14326.55) 
[Wed Mar 21 05:10:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:11:06 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Mar 21 05:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Wed Mar 21 06:05:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 06:05:11 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:47:08 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:08 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Mar 21 06:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:10 2012] Using photon index=1.80, rate=0.0328, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src66.arf
[Wed Mar 21 06:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:10 2012] Updating source flux to 1.3e-12
[Wed Mar 21 06:52:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting