[Mon Mar 19 10:51:17 2012] Detection parameters:
  Position = (293.8, 230.8) = 20 33 10.66 41 15 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3130.3 +/- 74.5
  Background counts = 87.3
  Rate = 0.1 +/- 0.004

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 4.91'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Mon Mar 19 20:51:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.696
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.89"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar 20 03:01:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 1890.210000, observed total counts = 2351.000000
[Tue Mar 20 03:02:14 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:02:14 2012] Source is confused with source 27
[Tue Mar 20 18:36:10 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Mar 20 18:36:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.696
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.89"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar 20 23:14:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar 20 23:14:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 20 23:14:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:16:04 2012] Spatial fit model total counts = 1897.550000, observed total counts = 2351.000000
[Tue Mar 20 23:16:04 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:16:04 2012] Source 5 is offset by -9.112352 and -0.252990 pixels which is larger than
2 X fitted extent = 7.928598 x 7.928598, not incorporating fit results
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:08 2012] Counts = 3130.262695, rescaling region sizes by 2.000000
[Wed Mar 21 04:53:08 2012] XMMSAS src. selection expression = ellipse(25513.511414, 20032.703903, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar 21 04:53:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (219, 156) - (369, 306)
[Wed Mar 21 04:53:08 2012] XMMSAS bgd. selection expression = annulus(25513.511414, 20032.703903, 4350.000000, 8700.000000, X, Y) && !ellipse(24530.236400, 24458.424200, 392.196811, 392.196811, 0.000000, X, Y) && !ellipse(32249.474800, 19253.572000, 507.232815, 507.232815, 0.000000, X, Y) && !ellipse(34383.005829, 18825.095688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24818.166000, 26268.341400, 380.418411, 380.418411, 0.000000, X, Y) && !ellipse(30397.782959, 11439.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.741200, 14373.231400, 861.564381, 861.564381, 0.000000, X, Y) && !ellipse(22702.488000, 13163.652000, 572.067216, 572.067216, 0.000000, X, Y) && !ellipse(31641.783661, 11251.404251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28726.603973, 13893.832779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.010280, 12204.857200, 397.788811, 397.788811, 0.000000, X, Y) && !ellipse(34326.228027, 12485.731354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30960.256226, 12455.805191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.273102, 12923.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.456390, 11857.945694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.994171, 17941.455475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31707.333679, 14061.014664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32993.092800, 13563.786000, 1248.616036, 1248.616036, 0.000000, X, Y) && !ellipse(25006.130005, 16138.545883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.739400, 15200.595400, 355.016810, 355.016810, 0.000000, X, Y) && !ellipse(32049.705017, 12930.787277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32174.090485, 12159.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.981018, 24965.539917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.983673, 12223.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.882019, 12157.565750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.162781, 12122.445023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25628.752960, 20658.289871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.581787, 24378.215576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34377.799316, 11264.262558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32170.744600, 12370.280600, 734.824021, 734.824021, 0.000000, X, Y) && !ellipse(29411.561707, 11185.097549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.820465, 17369.664383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19137.865400, 25294.526000, 477.402414, 477.402414, 0.000000, X, Y) && !ellipse(18370.544052, 11290.030945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21810.498400, 26082.882400, 456.082413, 456.082413, 0.000000, X, Y) && !ellipse(23725.293427, 24768.372131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.298000, 26814.438000, 1074.672031, 1074.672031, -0.000000, X, Y) && !ellipse(22917.275085, 23085.001251, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5.gif
[Wed Mar 21 04:58:46 2012] Mean detx,y = (1879.68, 4223.05) 
[Wed Mar 21 04:58:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:01:14 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:01:14 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 05:01:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Mar 21 05:39:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 05:39:20 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:47:07 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:07 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 06:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:10 2012] Using photon index=1.80, rate=0.15, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src5.arf
[Wed Mar 21 06:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:10 2012] Updating source flux to 2e-12
[Wed Mar 21 06:52:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting