[Mon Mar 19 10:51:17 2012] Detection parameters:
  Position = (282.7, 281.8) = 20 33 14.97 41 18 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19294.3 +/- 165.3
  Background counts = 106.9
  Rate = 0.7 +/- 0.006

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 1.66'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Mar 19 20:51:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 20 03:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 20 03:01:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 1 centroid is now closest to src. 23
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 12168.400000, observed total counts = 11848.000000
[Tue Mar 20 03:02:14 2012] Offset between fit and detection position for source 4 = 0.149329 pixels
[Tue Mar 20 03:02:14 2012] Warning, changing simple spatial fit ID from 1 to 42
[Tue Mar 20 03:02:14 2012] 11702.280000 total counts/ 3355.880000 bgd. counts: snr = 144.077440
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.149329 pixels
  Position = (282.5, 281.7) = 20 33 15.02 41 18 49.6
  Extent = 4.5 (4.5-4.6)", rotation angle = 0
  Source counts = 8346.4 +/- 108.2
  Background counts = 3355.9
  Rate = 0.4 +/- 0.005
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 12582.200000, observed total counts = 12677.000000
[Tue Mar 20 03:02:14 2012] Offset between fit and detection position for source 4 = 0.057806 pixels
[Tue Mar 20 03:02:14 2012] Warning, changing simple spatial fit ID from 42 to 48
[Tue Mar 20 03:02:14 2012] 11034.410000 total counts/ 3312.180000 bgd. counts: snr = 134.179376
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.057806 pixels
  Position = (282.5, 281.8) = 20 33 15.04 41 18 49.7
  Extent = 5.0 (4.9-5.2)" x 3.7 (3.6-3.9)", rotation angle = 58 (54-62) degrees
  Source counts = 7722.2 +/- 105.0
  Background counts = 3312.2
  Rate = 0.4 +/- 0.005
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Tue Mar 20 03:02:14 2012] Source is confused with source 22
[Tue Mar 20 03:02:14 2012] Source is confused with source 24
[Tue Mar 20 18:36:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 4.39"
[Tue Mar 20 18:36:10 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.988
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.39"
[Tue Mar 20 23:14:56 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 20 23:14:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 23:14:56 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 20 23:14:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 23:14:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 20 23:14:58 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 20 23:16:04 2012] Spatial fit model total counts = 13577.900000, observed total counts = 12846.000000
[Tue Mar 20 23:16:04 2012] Offset between fit and detection position for source 4 = 0.096221 pixels
[Tue Mar 20 23:16:04 2012] 13197.110000 total counts/ 4090.570000 bgd. counts: snr = 142.384097
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.096221 pixels
  Position = (282.5, 281.7) = 20 33 15.03 41 18 49.3
  Extent = 4.9 (4.8-5.0)", rotation angle = 0
  Source counts = 9106.5 +/- 114.9
  Background counts = 4090.6
  Rate = 0.4 +/- 0.005
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:08 2012] Counts = 9106.540000, rescaling region sizes by 2.000000
[Wed Mar 21 04:53:08 2012] XMMSAS src. selection expression = ellipse(24530.236400, 24458.424200, 588.295217, 588.295217, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 21 04:53:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (249, 248) - (316, 315)
[Wed Mar 21 04:53:08 2012] XMMSAS bgd. selection expression = annulus(24530.236400, 24458.424200, 1960.984056, 3921.968113, X, Y) && !ellipse(25513.511414, 20032.703903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24818.166000, 26268.341400, 380.418411, 380.418411, 0.000000, X, Y) && !ellipse(24710.981018, 24965.539917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25628.752960, 20658.289871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.581787, 24378.215576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21810.498400, 26082.882400, 456.082413, 456.082413, 0.000000, X, Y) && !ellipse(23725.293427, 24768.372131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.298000, 26814.438000, 1074.672031, 1074.672031, -0.000000, X, Y) && !ellipse(22917.275085, 23085.001251, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4.gif
[Wed Mar 21 04:53:18 2012] Mean detx,y = (98.92, 56.38) 
[Wed Mar 21 04:53:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 04:53:46 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 04:53:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 04:53:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 21 06:47:07 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:07 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 06:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:10 2012] Using photon index=1.80, rate=0.432, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4.arf
[Wed Mar 21 06:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:10 2012] Updating source flux to 4.7e-12
[Wed Mar 21 06:52:15 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Wed Mar 21 06:57:14 2012] Reading fit data from xmm0505110301/analysis//spectral/fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_pl.csv
[Wed Mar 21 06:57:14 2012] Spectral fit parameter nH value = 9.2668e+21
[Wed Mar 21 06:57:14 2012] Spectral fit parameter PhoIndex value = 3.50924
[Wed Mar 21 06:57:14 2012] Failed to get F(0.3-8.0) from xmm0505110301/analysis//spectral/fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 06:57:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:57:14 2012] Using Nh = 9.3e+21, photon index=3.51, rate=0.432, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src4.arf
[Wed Mar 21 06:57:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:57:14 2012] Updating source flux to 4.2e-12