[Mon Mar 19 10:51:18 2012] Detection parameters:
  Position = (330.7, 160.3) = 20 32 56.43 41 10 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 548.7 +/- 32.0
  Background counts = 61.2
  Rate = 0.02 +/- 0.001

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 10.29'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Mon Mar 19 20:51:31 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.57"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:05 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Mar 20 03:01:05 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Mar 20 03:01:05 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 25 centroid is now closest to src. 52
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 18:36:10 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Tue Mar 20 18:36:10 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 11.57"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Mar 20 23:14:59 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Mar 20 23:14:59 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Mar 20 23:16:04 2012] Warning, spatial fit 24 centroid is now closest to src. 52
[Tue Mar 20 23:16:04 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 13.349478 pixels away
[Tue Mar 20 23:16:04 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 15.980543 pixels away
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:09 2012] XMMSAS src. selection expression = ellipse(28726.603973, 13893.832779, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 04:53:09 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38_src.reg
[Wed Mar 21 04:53:09 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (293, 123) - (368, 198)
[Wed Mar 21 04:53:09 2012] XMMSAS bgd. selection expression = annulus(28726.603973, 13893.832779, 1087.500000, 2175.000000, X, Y) && !ellipse(30397.782959, 11439.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.741200, 14373.231400, 861.564381, 861.564381, 0.000000, X, Y) && !ellipse(31641.783661, 11251.404251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.010280, 12204.857200, 397.788811, 397.788811, 0.000000, X, Y) && !ellipse(30960.256226, 12455.805191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.273102, 12923.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31707.333679, 14061.014664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.739400, 15200.595400, 355.016810, 355.016810, 0.000000, X, Y) && !ellipse(28588.162781, 12122.445023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.561707, 11185.097549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:09 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38.gif
[Wed Mar 21 05:15:31 2012] Mean detx,y = (6203.31, 9620.83) 
[Wed Mar 21 05:15:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:15:48 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:15:48 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 21 05:15:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Mar 21 06:23:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 06:23:00 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:47:08 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:08 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 21 06:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:11 2012] Using photon index=1.80, rate=0.018, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src38.arf
[Wed Mar 21 06:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:11 2012] Updating source flux to 4.4e-13
[Wed Mar 21 06:52:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting