[Mon Mar 19 10:51:18 2012] Detection parameters:
  Position = (317.0, 175.3) = 20 33 1.72 41 11 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.1 +/- 19.3
  Background counts = 78.6
  Rate = 0.01 +/- 0.001

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 9.03'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Mon Mar 19 20:51:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.94"
[Tue Mar 20 03:01:03 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39.ximg exists
[Tue Mar 20 03:01:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39.csv
[Tue Mar 20 03:01:03 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Mar 20 03:01:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39.csv
[Tue Mar 20 03:01:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:06 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Mar 20 03:01:06 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Mar 20 03:01:06 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 421.199000, observed total counts = 422.000000
[Tue Mar 20 03:02:14 2012] Offset between fit and detection position for source 33 = 0.105635 pixels
[Tue Mar 20 03:02:14 2012] 419.139500 total counts/ 358.851000 bgd. counts: snr = 3.182566
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.105635 pixels
  Position = (316.9, 175.3) = 20 33 1.76 41 11 6.4
  Extent = 4.4 (3.4-5.6)", rotation angle = 0
  Source counts = 60.3 +/- 20.5
  Background counts = 358.9
  Rate = 0.003 +/- 0.001
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 18:36:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 4.45"
[Tue Mar 20 18:36:10 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.970
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 4.45"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:00 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Mar 20 23:15:00 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Mar 20 23:15:00 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Mar 20 23:16:04 2012] Spatial fit model total counts = 409.380000, observed total counts = 406.000000
[Tue Mar 20 23:16:04 2012] Offset between fit and detection position for source 33 = 0.015263 pixels
[Tue Mar 20 23:16:04 2012] 411.182200 total counts/ 347.451000 bgd. counts: snr = 3.419049
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.015263 pixels
  Position = (316.9, 175.3) = 20 33 1.76 41 11 6.4
  Extent = 4.4 (3.6-5.5)", rotation angle = 0
  Source counts = 63.7 +/- 20.3
  Background counts = 347.5
  Rate = 0.003 +/- 0.001
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:09 2012] XMMSAS src. selection expression = ellipse(27523.739400, 15200.595400, 266.262608, 266.262608, 0.000000, X, Y)
[Wed Mar 21 04:53:09 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33_src.reg
[Wed Mar 21 04:53:09 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (302, 160) - (332, 191)
[Wed Mar 21 04:53:09 2012] XMMSAS bgd. selection expression = annulus(27523.739400, 15200.595400, 443.771013, 887.542026, X, Y) && !ellipse(28726.603973, 13893.832779, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:09 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33.gif
[Wed Mar 21 05:20:35 2012] Mean detx,y = (4735.98, 8607.41) 
[Wed Mar 21 05:20:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:20:50 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:20:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 21 05:20:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Mar 21 06:37:33 2012] Not generating rmf since there are only 63 counts
[Wed Mar 21 06:37:33 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:47:08 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:09 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 21 06:47:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:12 2012] Using photon index=1.80, rate=0.00302, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src33.arf
[Wed Mar 21 06:47:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:12 2012] Updating source flux to 9.3e-14
[Wed Mar 21 06:52:15 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting