[Mon Mar 19 10:51:17 2012] Detection parameters:
  Position = (355.4, 121.6) = 20 32 46.95 41 7 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1651.1 +/- 50.5
  Background counts = 64.2
  Rate = 0.05 +/- 0.002

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 13.47'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Mon Mar 19 20:51:31 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.925
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.16"
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 03:01:02 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 20 03:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 03:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 20 03:01:04 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 20 03:01:04 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 5 centroid is now closest to src. 64
[Tue Mar 20 03:02:14 2012] Source 3 is offset by 5.600816 and -2.164740 pixels which is larger than
2 X fitted extent = 1.537766 x 1.537766, not incorporating fit results
[Tue Mar 20 03:02:14 2012] Source 3 is offset by -5.814517 and 0.854869 pixels which is larger than
2 X fitted extent = 1.464685 x 1.464685, not incorporating fit results
[Tue Mar 20 03:02:14 2012] Spatial fit model total counts = 1783.170000, observed total counts = 1759.000000
[Tue Mar 20 03:02:14 2012] Offset between fit and detection position for source 3 = 0.833550 pixels
[Tue Mar 20 03:02:14 2012] Warning, changing simple spatial fit ID from 5 to 21
[Tue Mar 20 03:02:14 2012] 1699.237000 total counts/ 1616.390000 bgd. counts: snr = 2.060648
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.833550 pixels
  Position = (356.2, 121.3) = 20 32 46.66 41 7 11.5
  Extent = 3.3" x 3.3", rotation angle = 0
  Source counts = 82.8 +/- 41.2
  Background counts = 1616.4
  Rate = 0.004 +/- 0.002
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 18:36:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 3.30"
[Tue Mar 20 18:36:10 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.947
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 3.30"
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5.csv
[Tue Mar 20 23:14:57 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 20 23:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5.csv
[Tue Mar 20 23:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 20 23:14:58 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Mar 20 23:16:04 2012] Spatial fit model total counts = 1516.990000, observed total counts = 1440.000000
[Tue Mar 20 23:16:04 2012] Offset between fit and detection position for source 3 = 0.594281 pixels
[Tue Mar 20 23:16:04 2012] 1426.101000 total counts/ 610.172000 bgd. counts: snr = 33.031343
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.594281 pixels
  Position = (355.7, 121.6) = 20 32 46.85 41 7 12.9
  Extent = 6.6 (6.6-13.2)", rotation angle = 0
  Source counts = 815.9 +/- 37.8
  Background counts = 610.2
  Rate = 0.04 +/- 0.002
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:08 2012] XMMSAS src. selection expression = ellipse(30893.580400, 10531.236000, 395.958011, 395.958011, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3_src.reg
[Wed Mar 21 04:53:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (333, 99) - (378, 144)
[Wed Mar 21 04:53:08 2012] XMMSAS bgd. selection expression = annulus(30893.580400, 10531.236000, 659.930019, 1319.860038, X, Y) && !ellipse(27543.066000, 8650.524800, 2181.008063, 272.626408, 85.768060, X, Y) && !ellipse(29548.336000, 9536.618000, 1197.240034, 1197.240034, 0.000000, X, Y) && !ellipse(29602.625580, 8829.799820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31853.620000, 10370.046000, 563.201616, 563.201616, 0.000000, X, Y) && !ellipse(30397.782959, 11439.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29970.400238, 10181.576790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.783661, 11251.404251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.010280, 12204.857200, 397.788811, 397.788811, 0.000000, X, Y) && !ellipse(30960.256226, 12455.805191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32174.090485, 12159.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32170.744600, 12370.280600, 734.824021, 734.824021, 0.000000, X, Y) && !ellipse(29411.561707, 11185.097549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:08 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3.gif
[Wed Mar 21 05:01:21 2012] Mean detx,y = (8903.27, 12603.13) 
[Wed Mar 21 05:01:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:01:31 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:01:32 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 21 05:01:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Mar 21 06:47:07 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:07 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 21 06:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:10 2012] Using photon index=1.80, rate=0.0387, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src3.arf
[Wed Mar 21 06:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:10 2012] Updating source flux to 1.6e-12
[Wed Mar 21 06:52:15 2012] Flag b found in src. 3 procflags, skipping spectral fitting