[Mon Mar 19 10:51:18 2012] Detection parameters:
  Position = (284.6, 287.5) = 20 33 14.22 41 19 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.5 +/- 29.9
  Background counts = 91.5
  Rate = 0.009 +/- 0.001

[Mon Mar 19 10:51:20 2012] Off-axis axis estimate = 1.28'
[Mon Mar 19 20:51:31 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 20:51:31 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Mon Mar 19 20:51:31 2012] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.052
[Mon Mar 19 20:51:31 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.07"
[Tue Mar 20 03:01:03 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42.ximg exists
[Tue Mar 20 03:01:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42.csv
[Tue Mar 20 03:01:03 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Mar 20 03:01:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42.csv
[Tue Mar 20 03:01:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 03:01:06 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Mar 20 03:01:06 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Mar 20 03:01:06 2012] Fit fullrun_mos2_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Tue Mar 20 03:02:14 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.813038 pixels away
[Tue Mar 20 03:02:14 2012] Warning, spatial fit 42 centroid is now closest to src. 4
[Tue Mar 20 03:02:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:02:14 2012] Assessing source extent using major
[Tue Mar 20 03:02:14 2012] Source does appear to be extended
[Tue Mar 20 03:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 03:02:14 2012] Source is confused with source 4
[Tue Mar 20 18:36:10 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 18:36:10 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Mar 20 18:36:10 2012] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.052
[Tue Mar 20 18:36:10 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.07"
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40.ximg exists
[Tue Mar 20 23:14:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40.csv
[Tue Mar 20 23:14:58 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Mar 20 23:14:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40.csv
[Tue Mar 20 23:14:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:15:00 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Mar 20 23:15:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue Mar 20 23:15:00 2012] fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Mar 20 23:15:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue Mar 20 23:15:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:16:04 2012] Spatial fit model total counts = 7841.830000, observed total counts = 11848.000000
[Tue Mar 20 23:16:04 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 23:16:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:16:04 2012] Assessing source extent using major
[Tue Mar 20 23:16:04 2012] Source does appear to be extended
[Tue Mar 20 23:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 04:53:10 2012] XMMSAS src. selection expression = ellipse(24710.981018, 24965.539917, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 04:53:10 2012] Writing source region out to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22_src.reg
[Wed Mar 21 04:53:10 2012] Extracting stamp from image fullrun_mos2_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (247, 250) - (322, 325)
[Wed Mar 21 04:53:10 2012] XMMSAS bgd. selection expression = annulus(24710.981018, 24965.539917, 1087.500000, 2175.000000, X, Y) && !ellipse(24530.236400, 24458.424200, 392.196811, 392.196811, 0.000000, X, Y) && !ellipse(24818.166000, 26268.341400, 380.418411, 380.418411, 0.000000, X, Y) && !ellipse(24984.581787, 24378.215576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.293427, 24768.372131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.298000, 26814.438000, 1074.672031, 1074.672031, -0.000000, X, Y) && !ellipse(22917.275085, 23085.001251, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 04:53:10 2012] Writing fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22.gif
[Wed Mar 21 05:21:37 2012] Mean detx,y = (113.61, -41.88) 
[Wed Mar 21 05:21:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 05:21:49 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 05:21:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 21 05:21:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Mar 21 06:37:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 06:37:50 2012] rmf not generated due to insufficient counts
[Wed Mar 21 06:47:09 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:09 2012] Error reading totcts from fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 21 06:47:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:12 2012] Using photon index=1.80, rate=0.00889, arf fullrun_mos2_xmm0505110301_pi300-10000_pass1_cl_src22.arf
[Wed Mar 21 06:47:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:12 2012] Updating source flux to 1e-13
[Wed Mar 21 06:52:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting