[Mon Mar 19 10:50:23 2012] Detection parameters:
  Position = (282.6, 281.9) = 20 33 14.99 41 18 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20472.6 +/- 170.4
  Background counts = 112.6
  Rate = 0.7 +/- 0.006

[Mon Mar 19 10:50:26 2012] Off-axis axis estimate = 1.66'
[Mon Mar 19 18:45:07 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 18:45:07 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Mar 19 18:45:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Mon Mar 19 18:45:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Mar 19 20:51:29 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 19 20:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 20:51:29 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 19 20:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 20:51:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 20:51:29 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 19 20:51:29 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 19 20:51:29 2012] Fit fullrun_mos1_xmm0505110301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 20 03:01:54 2012] Source 5 is offset by 7.276194 and -6.645297 pixels which is larger than
2 X fitted extent = 0.834405 x 0.834405, not incorporating fit results
[Tue Mar 20 03:01:54 2012] Source 5 is offset by -5.415048 and 6.930542 pixels which is larger than
2 X fitted extent = 4.591154 x 4.591154, not incorporating fit results
[Tue Mar 20 03:01:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 03:01:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 03:01:54 2012] Assessing source extent using major
[Tue Mar 20 03:01:54 2012] Source does appear to be extended
[Tue Mar 20 03:01:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 16:07:14 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 16:07:14 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Mar 20 16:07:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Tue Mar 20 16:07:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Tue Mar 20 18:36:09 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 20 18:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 18:36:09 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 20 18:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 18:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 18:36:09 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 20 18:36:09 2012] fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 20 18:36:09 2012] Fit fullrun_mos1_xmm0505110301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 20 23:15:48 2012] Spatial fit model total counts = 13853.500000, observed total counts = 13849.000000
[Tue Mar 20 23:15:48 2012] Offset between fit and detection position for source 5 = 0.098787 pixels
[Tue Mar 20 23:15:48 2012] 13860.650000 total counts/ 3904.500000 bgd. counts: snr = 159.334095
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.098787 pixels
  Position = (282.6, 281.8) = 20 33 14.98 41 18 49.8
  Extent = 5.5 (5.3-5.5)", rotation angle = 0
  Source counts = 9956.1 +/- 117.7
  Background counts = 3904.5
  Rate = 0.5 +/- 0.006
[Tue Mar 20 23:15:49 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 23:15:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 23:15:49 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 23:15:49 2012] Source does appear to be extended
[Tue Mar 20 23:15:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:33:25 2012] Counts = 9956.150000, rescaling region sizes by 2.000000
[Wed Mar 21 03:33:25 2012] XMMSAS src. selection expression = ellipse(24541.866000, 24466.714600, 655.100419, 655.100419, 0.000000, X, Y)
[Wed Mar 21 03:33:25 2012] Writing source region out to fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar 21 03:33:25 2012] Extracting stamp from image fullrun_mos1_xmm0505110301_pi300-10000_cl_sm2.00.img.gz, (245, 244) - (320, 319)
[Wed Mar 21 03:33:25 2012] XMMSAS bgd. selection expression = annulus(24541.866000, 24466.714600, 2183.668063, 4367.336126, X, Y) && !ellipse(25510.163406, 20013.188726, 432.391121, 349.624009, 2.220140, X, Y) && !ellipse(24762.971780, 26289.419600, 447.829613, 447.829613, 0.000000, X, Y) && !ellipse(25622.317169, 20819.661224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21778.184320, 26169.990200, 432.552012, 432.552012, 0.000000, X, Y) && !ellipse(25590.415600, 28365.307000, 458.145613, 458.145613, 0.000000, X, Y) && !ellipse(23031.441200, 29292.858600, 1327.784038, 1327.784038, 0.000000, X, Y) && !ellipse(27412.498800, 23114.610200, 825.008024, 825.008024, 0.000000, X, Y) && !ellipse(25596.921814, 23248.412994, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 03:33:25 2012] Writing fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5.gif
[Wed Mar 21 03:33:32 2012] Mean detx,y = (265.79, -276.84) 
[Wed Mar 21 03:33:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 03:33:59 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 03:33:59 2012] Setting source spectrum file to fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 03:33:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Mar 21 06:47:04 2012] Updating aperture counts using extracted products
[Wed Mar 21 06:47:04 2012] Error reading totcts from fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 21 06:47:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:47:06 2012] Using photon index=1.80, rate=0.469, arf fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5.arf
[Wed Mar 21 06:47:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:47:06 2012] Updating source flux to 4.6e-12
[Wed Mar 21 06:47:16 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Mar 21 06:52:15 2012] Reading fit data from xmm0505110301/analysis//spectral/fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_pl.csv
[Wed Mar 21 06:52:15 2012] Spectral fit parameter nH value = 8.90168e+21
[Wed Mar 21 06:52:15 2012] Spectral fit parameter PhoIndex value = 3.47813
[Wed Mar 21 06:52:15 2012] Failed to get F(0.3-8.0) from xmm0505110301/analysis//spectral/fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 06:52:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 06:52:15 2012] Using Nh = 8.9e+21, photon index=3.48, rate=0.469, arf fullrun_mos1_xmm0505110301_pi300-10000_pass1_cl_src5.arf
[Wed Mar 21 06:52:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 06:52:15 2012] Updating source flux to 4e-12