[Wed Dec 28 11:11:04 2011] Detection parameters:
  Position = (285.4, 318.7) = 15 45 30.24 48 46 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2244.0 +/- 57.9
  Background counts = 62.7
  Rate = 0.1 +/- 0.004

[Wed Dec 28 11:11:05 2011] Off-axis axis estimate = 1.75'
[Wed Dec 28 11:42:17 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:42:17 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Dec 28 11:42:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Wed Dec 28 11:42:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Dec 28 11:57:38 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 11:57:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:57:38 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 11:57:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:57:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:57:38 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 11:57:38 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 11:57:38 2011] Fit fullrun_mos1_xmm0505050701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 12:10:40 2011] Spatial fit model total counts = 1180.990000, observed total counts = 1181.000000
[Wed Dec 28 12:10:40 2011] Offset between fit and detection position for source 2 = 0.288089 pixels
[Wed Dec 28 12:10:40 2011] 1187.193000 total counts/ 305.390000 bgd. counts: snr = 50.459642
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.288089 pixels
  Position = (285.2, 318.5) = 15 45 30.34 48 46 7.9
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 881.8 +/- 34.5
  Background counts = 305.4
  Rate = 0.1 +/- 0.004
[Wed Dec 28 12:10:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:10:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:10:40 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 12:10:40 2011] Source does appear to be extended
[Wed Dec 28 12:10:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 12:36:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 12:36:42 2011] Initial guess for spatial extent in simple fitting = 5.72"
[Wed Dec 28 12:36:42 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.911
[Wed Dec 28 12:36:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.72"
[Wed Dec 28 12:51:50 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 12:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 12:51:50 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 12:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 12:51:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 12:51:50 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 12:51:50 2011] fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 12:51:50 2011] Fit fullrun_mos1_xmm0505050701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 13:01:45 2011] Spatial fit model total counts = 1180.990000, observed total counts = 1181.000000
[Wed Dec 28 13:01:45 2011] Offset between fit and detection position for source 2 = 0.000023 pixels
[Wed Dec 28 13:01:45 2011] 1187.191000 total counts/ 305.300000 bgd. counts: snr = 50.472116
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000023 pixels
  Position = (285.2, 318.5) = 15 45 30.34 48 46 7.9
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 881.9 +/- 34.5
  Background counts = 305.3
  Rate = 0.1 +/- 0.004
[Wed Dec 28 13:01:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 13:01:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 13:01:45 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 13:01:45 2011] Source does appear to be extended
[Wed Dec 28 13:01:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 13:36:12 2011] XMMSAS src. selection expression = ellipse(24764.273180, 27664.752200, 343.188610, 343.188610, 0.000000, X, Y)
[Wed Dec 28 13:36:12 2011] Writing source region out to fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 28 13:36:12 2011] Extracting stamp from image fullrun_mos1_xmm0505050701_pi300-10000_cl_sm2.00.img.gz, (265, 299) - (305, 338)
[Wed Dec 28 13:36:12 2011] XMMSAS bgd. selection expression = annulus(24764.273180, 27664.752200, 571.981016, 1143.962033, X, Y)
[Wed Dec 28 13:36:12 2011] Writing fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2.gif
[Wed Dec 28 13:36:16 2011] Mean detx,y = (378.35, -270.92) 
[Wed Dec 28 13:36:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 13:36:40 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 13:36:41 2011] Setting source spectrum file to fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 13:36:41 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 28 14:03:39 2011] Updating aperture counts using extracted products
[Wed Dec 28 14:03:39 2011] Error reading totcts from fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 14:03:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 14:03:39 2011] Using photon index=1.80, rate=0.0963, arf fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 14:03:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 14:03:39 2011] Updating source flux to 1.1e-12
[Wed Dec 28 14:04:04 2011] Reading fit data from xmm0505050701/analysis//spectral/fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 28 14:04:04 2011] Spectral fit parameter nH value = 3.53198e+12
[Wed Dec 28 14:04:04 2011] Spectral fit parameter PhoIndex value = 2.82245
[Wed Dec 28 14:04:04 2011] Failed to get F(0.3-8.0) from xmm0505050701/analysis//spectral/fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 14:04:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 14:04:04 2011] Using Nh = 3.5e+12, photon index=2.82, rate=0.0963, arf fullrun_mos1_xmm0505050701_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 14:04:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 14:04:04 2011] Updating source flux to 8.8e-13