[Tue Dec 27 11:31:16 2011] Detection parameters:
  Position = (175.5, 341.8) = 15 46 19.31 48 47 44.1
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 82.7 +/- 13.2
  Background counts = 235.2
  Rate = 0.005 +/- 0.0008

[Tue Dec 27 11:31:16 2011] Off-axis axis estimate = 9.45'
[Tue Dec 27 11:52:48 2011] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 11:52:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 11:52:48 2011] Initial guess for spatial extent in simple fitting = 11.15"
[Tue Dec 27 11:52:48 2011] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.905
[Tue Dec 27 11:52:48 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.15"
[Tue Dec 27 12:09:19 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Dec 27 12:09:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4.csv
[Tue Dec 27 12:09:19 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Dec 27 12:09:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4.csv
[Tue Dec 27 12:09:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 12:09:19 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Dec 27 12:09:19 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Dec 27 12:09:19 2011] Fit fullrun_mos1_xmm0505050301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Dec 27 12:34:27 2011] Source 1 is offset by 5.959756 and 1.759202 pixels which is larger than
2 X fitted extent = 3.287131 x 3.287131, not incorporating fit results
[Tue Dec 27 12:34:27 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 12:34:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 12:34:27 2011] Assessing source extent using major
[Tue Dec 27 12:34:27 2011] Source does appear to be extended
[Tue Dec 27 12:34:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 12:42:21 2011] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 12:42:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 12:42:21 2011] Initial guess for spatial extent in simple fitting = 11.15"
[Tue Dec 27 12:42:21 2011] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.905
[Tue Dec 27 12:42:21 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 11.15"
[Tue Dec 27 12:55:40 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 27 12:55:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 12:55:40 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 27 12:55:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 12:55:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 12:55:40 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 27 12:55:40 2011] fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 27 12:55:40 2011] Fit fullrun_mos1_xmm0505050301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Dec 27 13:23:51 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 183.221920 pixels away
[Tue Dec 27 13:23:51 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.005427 pixels away
[Tue Dec 27 13:23:51 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 13:23:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 13:23:51 2011] Assessing source extent using major
[Tue Dec 27 13:23:51 2011] Source does appear to be extended
[Tue Dec 27 13:23:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 13:54:31 2011] XMMSAS src. selection expression = ellipse(15221.036789, 29692.126617, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Dec 27 13:54:31 2011] Writing source region out to fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 27 13:54:31 2011] Extracting stamp from image fullrun_mos1_xmm0505050301_pi300-10000_cl_sm2.00.img.gz, (101, 267) - (251, 417)
[Tue Dec 27 13:54:31 2011] XMMSAS bgd. selection expression = annulus(15221.036789, 29692.126617, 2175.000000, 4350.000000, X, Y)
[Tue Dec 27 13:54:31 2011] Writing fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1.gif
[Tue Dec 27 13:55:51 2011] Mean detx,y = (9838.42, -2834.85) 
[Tue Dec 27 13:55:55 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 13:58:10 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 13:58:11 2011] Setting source spectrum file to fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 13:58:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 27 14:08:41 2011] Not generating rmf since there are only 82 counts
[Tue Dec 27 14:08:41 2011] rmf not generated due to insufficient counts
[Tue Dec 27 14:25:34 2011] Updating aperture counts using extracted products
[Tue Dec 27 14:25:34 2011] Error reading totcts from fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 14:25:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 14:25:34 2011] Using photon index=1.80, rate=0.00504, arf fullrun_mos1_xmm0505050301_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 14:25:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 14:25:34 2011] Updating source flux to 7.7e-14
[Tue Dec 27 14:25:36 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting