[Sun Dec 18 20:21:23 2011] Detection parameters:
  Position = (284.3, 317.0) = 15 45 30.21 48 46 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3537.0 +/- 71.7
  Background counts = 34.2
  Rate = 0.3 +/- 0.007

[Sun Dec 18 20:21:23 2011] Off-axis axis estimate = 1.69'
[Sun Dec 18 20:23:16 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:23:16 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Dec 18 20:23:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sun Dec 18 20:23:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Dec 18 20:38:45 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 20:38:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:38:45 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 20:38:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:38:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 20:38:45 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 20:38:45 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 20:38:45 2011] Fit fullrun_pn_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 20:51:14 2011] Spatial fit model total counts = 2340.000000, observed total counts = 2340.000000
[Sun Dec 18 20:51:14 2011] Offset between fit and detection position for source 1 = 0.063570 pixels
[Sun Dec 18 20:51:14 2011] 2345.627000 total counts/ 527.117000 bgd. counts: snr = 79.206748
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.063570 pixels
  Position = (284.2, 317.0) = 15 45 30.24 48 46 6.8
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 1818.5 +/- 48.4
  Background counts = 527.1
  Rate = 0.4 +/- 0.01
[Sun Dec 18 20:51:14 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 20:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 20:51:14 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 20:51:14 2011] Source does appear to be extended
[Sun Dec 18 20:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 20:51:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:51:20 2011] Initial guess for spatial extent in simple fitting = 6.08"
[Sun Dec 18 20:51:20 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.110
[Sun Dec 18 20:51:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Sun Dec 18 21:05:09 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 21:05:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 21:05:09 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 21:05:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 21:05:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 21:05:09 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 21:05:09 2011] fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 21:05:09 2011] Fit fullrun_pn_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 21:13:28 2011] Spatial fit model total counts = 2340.000000, observed total counts = 2340.000000
[Sun Dec 18 21:13:28 2011] Offset between fit and detection position for source 1 = 0.000005 pixels
[Sun Dec 18 21:13:28 2011] 2345.634000 total counts/ 527.154000 bgd. counts: snr = 79.202662
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000005 pixels
  Position = (284.2, 317.0) = 15 45 30.24 48 46 6.8
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 1818.5 +/- 48.4
  Background counts = 527.2
  Rate = 0.4 +/- 0.01
[Sun Dec 18 21:13:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 21:13:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 21:13:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 21:13:28 2011] Source does appear to be extended
[Sun Dec 18 21:13:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 21:13:34 2011] Counts = 1818.480000, rescaling region sizes by 2.000000
[Sun Dec 18 21:13:34 2011] XMMSAS src. selection expression = ellipse(24679.215220, 27528.795200, 729.827358, 729.827358, 0.000000, X, Y)
[Sun Dec 18 21:13:34 2011] Writing source region out to fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 21:13:34 2011] Extracting stamp from image fullrun_pn_xmm0505050201_pi300-10000_cl_sm2.00.img.gz, (242, 275) - (326, 359)
[Sun Dec 18 21:13:34 2011] XMMSAS bgd. selection expression = annulus(24679.215220, 27528.795200, 2432.757858, 4865.515717, X, Y) && !ellipse(23607.742780, 28847.266600, 515.396015, 515.396015, 0.000000, X, Y) && !ellipse(19677.180600, 31523.523420, 459.413212, 459.413212, 0.000000, X, Y) && !ellipse(29172.714720, 30139.336800, 536.367539, 536.367539, 0.000000, X, Y) && !ellipse(21515.651068, 33146.795564, 1345.381243, 833.122764, 120.093217, X, Y)
[Sun Dec 18 21:13:34 2011] Writing fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 21:13:39 2011] Mean detx,y = (57.26, -223.70) 
[Sun Dec 18 21:13:42 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 21:15:03 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 21:15:03 2011] Setting source spectrum file to fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 21:15:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 18 21:42:44 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:42:44 2011] Error reading totcts from fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 21:42:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:42:44 2011] Using photon index=1.80, rate=0.363, arf fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 21:42:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:42:44 2011] Updating source flux to 9e-13
[Sun Dec 18 21:43:16 2011] Reading fit data from xmm0505050201/analysis//spectral/fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 18 21:43:16 2011] Spectral fit parameter nH value = 2.4565e+13
[Sun Dec 18 21:43:16 2011] Spectral fit parameter PhoIndex value = 2.57408
[Sun Dec 18 21:43:16 2011] Failed to get F(0.3-8.0) from xmm0505050201/analysis//spectral/fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 21:43:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:43:16 2011] Using Nh = 2.5e+13, photon index=2.57, rate=0.363, arf fullrun_pn_xmm0505050201_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 21:43:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:43:16 2011] Updating source flux to 6.1e-13