[Sun Dec 18 20:21:34 2011] Detection parameters:
  Position = (271.5, 331.7) = 15 45 35.86 48 47 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.4 +/- 19.4
  Background counts = 72.4
  Rate = 0.01 +/- 0.001

[Sun Dec 18 20:21:34 2011] Off-axis axis estimate = 3.10'
[Sun Dec 18 20:38:45 2011] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:38:45 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Sun Dec 18 20:38:45 2011] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.688
[Sun Dec 18 20:38:45 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.98"
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 20:46:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 20:46:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 20:46:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 20:46:58 2011] Fit fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 20:51:15 2011] Spatial fit model total counts = 128.999000, observed total counts = 129.000000
[Sun Dec 18 20:51:15 2011] Offset between fit and detection position for source 3 = 0.647997 pixels
[Sun Dec 18 20:51:15 2011] 129.521600 total counts/ 93.951700 bgd. counts: snr = 3.669698
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.647997 pixels
  Position = (272.1, 331.9) = 15 45 35.59 48 47 11.6
  Extent = 3.7 (2.4-5.6)", rotation angle = 0
  Source counts = 35.6 +/- 11.4
  Background counts = 94.0
  Rate = 0.004 +/- 0.001
[Sun Dec 18 20:51:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 20:51:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 20:51:15 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 20:51:15 2011] Source does appear to be extended
[Sun Dec 18 20:51:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 21:05:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 21:05:10 2011] Initial guess for spatial extent in simple fitting = 3.69"
[Sun Dec 18 21:05:10 2011] source mask rpix=0.8, npix_max = 7, mask sum = 2, frac = 0.275
[Sun Dec 18 21:05:10 2011] Skipping simple spatial due to low active detector fraction
[Sun Dec 18 21:13:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 21:13:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 21:13:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 21:13:28 2011] Source does appear to be extended
[Sun Dec 18 21:13:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 21:32:05 2011] XMMSAS src. selection expression = ellipse(23622.773200, 28825.419400, 221.419806, 221.419806, 0.000000, X, Y)
[Sun Dec 18 21:32:05 2011] Writing source region out to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 21:32:05 2011] Extracting stamp from image fullrun_mos1_xmm0505050201_pi300-10000_cl_sm2.00.img.gz, (259, 319) - (285, 345)
[Sun Dec 18 21:32:05 2011] XMMSAS bgd. selection expression = annulus(23622.773200, 28825.419400, 369.033011, 738.066021, X, Y)
[Sun Dec 18 21:32:05 2011] Writing fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 21:32:28 2011] Mean detx,y = (1725.61, 608.66) 
[Sun Dec 18 21:32:29 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 21:32:35 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 21:32:35 2011] Setting source spectrum file to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 21:32:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 21:37:25 2011] Not generating rmf since there are only 35 counts
[Sun Dec 18 21:37:25 2011] rmf not generated due to insufficient counts
[Sun Dec 18 21:42:45 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:42:45 2011] Error reading totcts from fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 21:42:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:42:45 2011] Using photon index=1.80, rate=0.00402, arf fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 21:42:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:42:45 2011] Updating source flux to 5.7e-14
[Sun Dec 18 21:42:46 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting