[Sun Dec 18 20:21:34 2011] Detection parameters:
  Position = (284.5, 317.0) = 15 45 30.12 48 46 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1948.7 +/- 54.7
  Background counts = 83.4
  Rate = 0.1 +/- 0.003

[Sun Dec 18 20:21:34 2011] Off-axis axis estimate = 1.68'
[Sun Dec 18 20:38:45 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:38:45 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Dec 18 20:38:45 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Sun Dec 18 20:38:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 20:46:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 20:46:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:46:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 20:46:58 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 20:46:58 2011] Fit fullrun_mos1_xmm0505050201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 20:51:15 2011] Spatial fit model total counts = 1138.930000, observed total counts = 1139.000000
[Sun Dec 18 20:51:15 2011] Offset between fit and detection position for source 1 = 0.152533 pixels
[Sun Dec 18 20:51:15 2011] 1139.542000 total counts/ 308.925000 bgd. counts: snr = 47.257886
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152533 pixels
  Position = (284.4, 316.9) = 15 45 30.18 48 46 6.4
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 830.6 +/- 33.8
  Background counts = 308.9
  Rate = 0.09 +/- 0.004
[Sun Dec 18 20:51:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 20:51:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 20:51:15 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 20:51:15 2011] Source does appear to be extended
[Sun Dec 18 20:51:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 21:05:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 21:05:10 2011] Initial guess for spatial extent in simple fitting = 4.77"
[Sun Dec 18 21:05:10 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.882
[Sun Dec 18 21:05:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.77"
[Sun Dec 18 21:10:10 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 21:10:10 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 21:10:10 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 21:10:10 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 21:10:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 21:10:10 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 21:10:10 2011] fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 21:10:10 2011] Fit fullrun_mos1_xmm0505050201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 21:13:28 2011] Spatial fit model total counts = 1138.920000, observed total counts = 1139.000000
[Sun Dec 18 21:13:28 2011] Offset between fit and detection position for source 1 = 0.000018 pixels
[Sun Dec 18 21:13:28 2011] 1139.534000 total counts/ 308.765000 bgd. counts: snr = 47.278779
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000018 pixels
  Position = (284.4, 316.9) = 15 45 30.18 48 46 6.4
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 830.8 +/- 33.8
  Background counts = 308.8
  Rate = 0.09 +/- 0.004
[Sun Dec 18 21:13:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 21:13:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 21:13:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 21:13:28 2011] Source does appear to be extended
[Sun Dec 18 21:13:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 21:32:05 2011] XMMSAS src. selection expression = ellipse(24691.510800, 27520.778200, 286.422608, 286.422608, 0.000000, X, Y)
[Sun Dec 18 21:32:05 2011] Writing source region out to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 21:32:05 2011] Extracting stamp from image fullrun_mos1_xmm0505050201_pi300-10000_cl_sm2.00.img.gz, (268, 300) - (301, 333)
[Sun Dec 18 21:32:05 2011] XMMSAS bgd. selection expression = annulus(24691.510800, 27520.778200, 477.371014, 954.742027, X, Y)
[Sun Dec 18 21:32:05 2011] Writing fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 21:32:07 2011] Mean detx,y = (283.12, -263.51) 
[Sun Dec 18 21:32:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 21:32:15 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 21:32:15 2011] Setting source spectrum file to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 21:32:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 18 21:42:45 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:42:45 2011] Error reading totcts from fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 21:42:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:42:45 2011] Using photon index=1.80, rate=0.0938, arf fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 21:42:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:42:45 2011] Updating source flux to 1.2e-12
[Sun Dec 18 21:42:52 2011] Reading fit data from xmm0505050201/analysis//spectral/fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 18 21:42:52 2011] Spectral fit parameter nH value = 1.96038e+12
[Sun Dec 18 21:42:52 2011] Spectral fit parameter PhoIndex value = 2.58146
[Sun Dec 18 21:42:52 2011] Failed to get F(0.3-8.0) from xmm0505050201/analysis//spectral/fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 21:42:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:42:52 2011] Using Nh = 2e+12, photon index=2.58, rate=0.0938, arf fullrun_mos1_xmm0505050201_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 21:42:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:42:52 2011] Updating source flux to 9.5e-13