[Tue Feb 21 01:01:33 2012] Detection parameters:
  Position = (164.3, 397.9) = 16 27 26.66 35 8 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5449.7 +/- 89.2
  Background counts = 19.5
  Rate = 0.3 +/- 0.006

[Tue Feb 21 01:01:35 2012] Off-axis axis estimate = 12.11'
[Tue Feb 21 01:04:19 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:04:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 01:04:19 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Tue Feb 21 01:04:19 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.925
[Tue Feb 21 01:04:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.48"
[Tue Feb 21 02:14:14 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 21 02:14:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 02:14:14 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 21 02:14:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 02:14:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 02:14:15 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 21 02:14:15 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 21 02:14:15 2012] Fit fullrun_pn_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 21 03:21:56 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.831254 pixels away
[Tue Feb 21 03:21:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.165721 pixels away
[Tue Feb 21 03:21:56 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 03:21:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 03:21:56 2012] Assessing source extent using major
[Tue Feb 21 03:21:56 2012] Source does appear to be extended
[Tue Feb 21 03:21:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:22:25 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:22:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 03:22:25 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Tue Feb 21 03:22:25 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.925
[Tue Feb 21 03:22:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.48"
[Tue Feb 21 04:21:24 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 04:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 04:21:24 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 04:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 04:21:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 04:21:24 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 04:21:24 2012] fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 04:21:24 2012] Fit fullrun_pn_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 05:36:00 2012] Spatial fit model total counts = 5550.400000, observed total counts = 5547.000000
[Tue Feb 21 05:36:00 2012] Offset between fit and detection position for source 1 = 0.136193 pixels
[Tue Feb 21 05:36:00 2012] 5595.400000 total counts/ 1488.930000 bgd. counts: snr = 106.422024
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.136193 pixels
  Position = (164.4, 397.8) = 16 27 26.63 35 8 15.4
  Extent = 7.3 (7.1-7.4)", rotation angle = 0
  Source counts = 4106.5 +/- 74.8
  Background counts = 1488.9
  Rate = 0.3 +/- 0.005
[Tue Feb 21 05:36:00 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 05:36:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 05:36:00 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 05:36:00 2012] Source does appear to be extended
[Tue Feb 21 05:36:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 05:36:25 2012] Counts = 4106.470000, rescaling region sizes by 2.000000
[Tue Feb 21 05:36:25 2012] XMMSAS src. selection expression = ellipse(14251.231400, 34558.494000, 872.528425, 872.528425, 0.000000, X, Y)
[Tue Feb 21 05:36:25 2012] Writing source region out to fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 21 05:36:25 2012] Extracting stamp from image fullrun_pn_xmm0505011201_pi300-10000_cl_sm2.00.img.gz, (114, 348) - (215, 448)
[Tue Feb 21 05:36:25 2012] XMMSAS bgd. selection expression = annulus(14251.231400, 34558.494000, 2908.428084, 5816.856167, X, Y) && !ellipse(15196.094000, 37387.168000, 1011.008029, 1011.008029, 0.000000, X, Y) && !ellipse(14569.639954, 35775.186371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16277.603043, 37802.941101, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 05:36:25 2012] Writing fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1.gif
[Tue Feb 21 05:36:43 2012] Mean detx,y = (-10040.89, -9911.60) 
[Tue Feb 21 05:36:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 05:38:30 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 05:38:30 2012] Setting source spectrum file to fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 21 05:38:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 21 07:21:34 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:21:34 2012] Error reading totcts from fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 21 07:21:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:21:36 2012] Using photon index=1.80, rate=0.256, arf fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1.arf
[Tue Feb 21 07:21:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:21:36 2012] Updating source flux to 1.6e-12
[Tue Feb 21 07:24:08 2012] Reading fit data from xmm0505011201/analysis//spectral/fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 21 07:24:08 2012] Spectral fit parameter nH value = 565353000000.0
[Tue Feb 21 07:24:08 2012] Spectral fit parameter PhoIndex value = 1.91988
[Tue Feb 21 07:24:08 2012] Failed to get F(0.3-8.0) from xmm0505011201/analysis//spectral/fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 07:24:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:24:08 2012] Using Nh = 5.7e+11, photon index=1.92, rate=0.256, arf fullrun_pn_xmm0505011201_pi300-10000_pass1_cl_src1.arf
[Tue Feb 21 07:24:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:24:08 2012] Updating source flux to 1.5e-12