[Tue Feb 21 01:01:57 2012] Detection parameters:
  Position = (168.1, 412.1) = 16 27 25.33 35 9 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.0 +/- 8.8
  Background counts = 9.6
  Rate = 0.002 +/- 0.0005

[Tue Feb 21 01:01:58 2012] Off-axis axis estimate = 12.54'
[Tue Feb 21 02:14:15 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 02:14:15 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Tue Feb 21 02:14:15 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.770
[Tue Feb 21 02:14:15 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.70"
[Tue Feb 21 02:42:12 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_src16.ximg exists
[Tue Feb 21 02:42:12 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Feb 21 02:42:12 2012] Fit fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_src16 appears to have run properly
[Tue Feb 21 02:42:12 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Feb 21 02:42:12 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Feb 21 02:42:12 2012] Fit fullrun_mos1_xmm0505011201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Feb 21 03:22:00 2012] Spatial fit model total counts = 173.770000, observed total counts = 187.000000
[Tue Feb 21 03:22:00 2012] Offset between fit and detection position for source 4 = 7.450599 pixels
[Tue Feb 21 03:22:00 2012] 154.891860 total counts/ 1.427860 bgd. counts: snr = 128.429177
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 7.450599 pixels
  Position = (168.3, 419.5) = 16 27 25.25 35 9 50.0
  Extent = 24.9 (24.9-24.9)", rotation angle = 0
  Source counts = 153.5 +/- 12.4
  Background counts = 1.4
  Rate = 0.009 +/- 0.0007
[Tue Feb 21 03:22:00 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 03:22:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 03:22:00 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 03:22:00 2012] Source does appear to be extended
[Tue Feb 21 03:22:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:22:00 2012] Source is confused with source 2
[Tue Feb 21 04:21:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 04:21:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 04:21:25 2012] Initial guess for spatial extent in simple fitting = 24.88"
[Tue Feb 21 04:21:25 2012] source mask rpix=5.7, npix_max = 154, mask sum = 167, frac = 1.080
[Tue Feb 21 04:21:25 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 24.88"
[Tue Feb 21 04:50:53 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15.ximg exists
[Tue Feb 21 04:50:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15.csv
[Tue Feb 21 04:50:53 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Feb 21 04:50:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15.csv
[Tue Feb 21 04:50:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 04:50:54 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Feb 21 04:50:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Feb 21 04:50:54 2012] fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Feb 21 04:50:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Feb 21 04:50:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505011201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:36:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.641448 pixels away
[Tue Feb 21 05:36:04 2012] Warning, spatial fit 15 centroid is now closest to src. 1
[Tue Feb 21 05:36:04 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 05:36:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 05:36:04 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 05:36:04 2012] Source does appear to be extended
[Tue Feb 21 05:36:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:38:23 2012] XMMSAS src. selection expression = ellipse(14594.385200, 36449.846000, 1492.578043, 1492.578043, 0.000000, X, Y)
[Tue Feb 21 06:38:23 2012] Writing source region out to fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_src.reg
[Tue Feb 21 06:38:23 2012] Extracting stamp from image fullrun_mos1_xmm0505011201_pi300-10000_cl_sm2.00.img.gz, (83, 334) - (254, 505)
[Tue Feb 21 06:38:23 2012] XMMSAS bgd. selection expression = annulus(14594.385200, 36449.846000, 2487.630072, 4975.260143, X, Y) && !ellipse(14226.195984, 34563.152222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15297.394600, 37502.633800, 423.356012, 423.356012, 0.000000, X, Y)
[Tue Feb 21 06:38:23 2012] Writing fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4.gif
[Tue Feb 21 06:47:35 2012] Mean detx,y = (11361.95, -9529.43) 
[Tue Feb 21 06:47:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 06:48:29 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 06:48:30 2012] Setting source spectrum file to fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Feb 21 06:48:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Feb 21 07:21:38 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:21:38 2012] Error reading totcts from fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Feb 21 07:21:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:21:39 2012] Using photon index=1.80, rate=0.00894, arf fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4.arf
[Tue Feb 21 07:21:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:21:39 2012] Updating source flux to 2.1e-13
[Tue Feb 21 07:21:43 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue Feb 21 07:21:59 2012] Reading fit data from xmm0505011201/analysis//spectral/fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_pl.csv
[Tue Feb 21 07:21:59 2012] Spectral fit parameter nH value = 1.15426e+21
[Tue Feb 21 07:21:59 2012] Spectral fit parameter PhoIndex value = 2.38813
[Tue Feb 21 07:21:59 2012] Failed to get F(0.3-8.0) from xmm0505011201/analysis//spectral/fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 07:21:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:21:59 2012] Using Nh = 1.2e+21, photon index=2.39, rate=0.00894, arf fullrun_mos1_xmm0505011201_pi300-10000_pass1_cl_src4.arf
[Tue Feb 21 07:21:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:21:59 2012] Updating source flux to 1.8e-13