[Thu Dec 22 10:25:09 2011] Detection parameters:
  Position = (426.7, 352.5) = 16 25 53.47 35 4 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.9 +/- 6.8
  Background counts = 6.1
  Rate = 0.003 +/- 0.0009

[Thu Dec 22 10:25:10 2011] Off-axis axis estimate = 10.09'
[Thu Dec 22 11:43:39 2011] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:43:39 2011] Initial guess for spatial extent in simple fitting = 11.47"
[Thu Dec 22 11:43:39 2011] source mask rpix=2.6, npix_max = 39, mask sum = 38, frac = 0.965
[Thu Dec 22 11:43:39 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 11.47"
[Thu Dec 22 12:31:29 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13.ximg exists
[Thu Dec 22 12:31:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13.csv
[Thu Dec 22 12:31:29 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Dec 22 12:31:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13.csv
[Thu Dec 22 12:31:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 12:31:29 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Dec 22 12:31:29 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Dec 22 12:31:29 2011] Fit fullrun_mos1_xmm0505010501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Dec 22 13:41:58 2011] Spatial fit model total counts = 75.997100, observed total counts = 76.000000
[Thu Dec 22 13:41:58 2011] Offset between fit and detection position for source 11 = 1.031676 pixels
[Thu Dec 22 13:41:58 2011] 73.915300 total counts/ 47.500700 bgd. counts: snr = 3.832605
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.031676 pixels
  Position = (426.9, 351.5) = 16 25 53.42 35 4 54.1
  Extent = 8.4 (4.1-16.4)", rotation angle = 0
  Source counts = 26.4 +/- 8.6
  Background counts = 47.5
  Rate = 0.002 +/- 0.0006
[Thu Dec 22 13:41:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 13:41:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 13:41:58 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 13:41:58 2011] Source does appear to be extended
[Thu Dec 22 13:41:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 14:57:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 14:57:08 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Dec 22 14:57:08 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.055
[Thu Dec 22 14:57:08 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 8.41"
[Thu Dec 22 15:31:19 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12.ximg exists
[Thu Dec 22 15:31:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12.csv
[Thu Dec 22 15:31:19 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Dec 22 15:31:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12.csv
[Thu Dec 22 15:31:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 15:31:19 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Dec 22 15:31:19 2011] fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Dec 22 15:31:19 2011] Fit fullrun_mos1_xmm0505010501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Dec 22 16:26:22 2011] Warning, spatial fit 12 centroid is now closest to src. 5
[Thu Dec 22 16:26:22 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 16:26:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 16:26:22 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 16:26:22 2011] Source does appear to be extended
[Thu Dec 22 16:26:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 17:19:46 2011] XMMSAS src. selection expression = ellipse(37089.146600, 30528.477000, 504.738615, 504.738615, 0.000000, X, Y)
[Thu Dec 22 17:19:46 2011] Writing source region out to fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11_src.reg
[Thu Dec 22 17:19:46 2011] Extracting stamp from image fullrun_mos1_xmm0505010501_pi300-10000_cl_sm2.00.img.gz, (398, 322) - (456, 380)
[Thu Dec 22 17:19:46 2011] XMMSAS bgd. selection expression = annulus(37089.146600, 30528.477000, 841.231024, 1682.462048, X, Y)
[Thu Dec 22 17:19:46 2011] Writing fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11.gif
[Thu Dec 22 17:29:44 2011] Mean detx,y = (-170.76, 10675.38) 
[Thu Dec 22 17:29:47 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 17:30:21 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 17:30:21 2011] Setting source spectrum file to fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec 22 17:30:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Dec 22 17:39:52 2011] Not generating rmf since there are only 26 counts
[Thu Dec 22 17:39:52 2011] rmf not generated due to insufficient counts
[Thu Dec 22 18:00:11 2011] Updating aperture counts using extracted products
[Thu Dec 22 18:00:12 2011] Error reading totcts from fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec 22 18:00:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 18:00:12 2011] Using photon index=1.80, rate=0.00194, arf fullrun_mos1_xmm0505010501_pi300-10000_pass1_cl_src11.arf
[Thu Dec 22 18:00:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 18:00:12 2011] Updating source flux to 3.2e-14
[Thu Dec 22 18:00:17 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting