[Thu Aug 23 12:56:39 2012] Detection parameters:
  Position = (142.9, 267.9) = 12 25 11.67 58 10 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.9 +/- 28.1
  Background counts = 304.1
  Rate = 0.02 +/- 0.003

[Thu Aug 23 12:56:41 2012] Off-axis axis estimate = 11.49'
[Thu Aug 23 13:03:01 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:03:01 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Thu Aug 23 13:03:01 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827
[Thu Aug 23 13:03:01 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.18"
[Thu Aug 23 17:13:11 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Aug 23 17:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19.csv
[Thu Aug 23 17:13:11 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Aug 23 17:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19.csv
[Thu Aug 23 17:13:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:13:13 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Aug 23 17:13:13 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Aug 23 17:13:13 2012] Fit fullrun_pn_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Aug 23 17:20:55 2012] Spatial fit model total counts = 2110.180000, observed total counts = 1935.000000
[Thu Aug 23 17:20:55 2012] Offset between fit and detection position for source 23 = 0.713294 pixels
[Thu Aug 23 17:20:55 2012] 1591.425000 total counts/ 1247.280000 bgd. counts: snr = 9.744498
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.713294 pixels
  Position = (143.0, 268.6) = 12 25 11.61 58 10 51.8
  Extent = 12.4 (9.1-15.3)", rotation angle = 0
  Source counts = 344.1 +/- 39.9
  Background counts = 1247.3
  Rate = 0.1 +/- 0.01
[Thu Aug 23 17:20:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 17:20:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 17:20:55 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 17:20:55 2012] Source does appear to be extended
[Thu Aug 23 17:20:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 17:21:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:21:05 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Aug 23 17:21:05 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.885
[Thu Aug 23 17:21:05 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.45"
[Thu Aug 23 20:18:20 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18.ximg exists
[Thu Aug 23 20:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18.csv
[Thu Aug 23 20:18:20 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Aug 23 20:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18.csv
[Thu Aug 23 20:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:18:21 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Aug 23 20:18:21 2012] fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Aug 23 20:18:21 2012] Fit fullrun_pn_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Aug 23 20:25:07 2012] Warning, spatial fit 18 centroid is now closest to src. 24
[Thu Aug 23 20:25:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:25:07 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 20:25:07 2012] Source does appear to be extended
[Thu Aug 23 20:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 20:25:17 2012] XMMSAS src. selection expression = ellipse(12392.087400, 23317.656200, 746.748021, 746.748021, 0.000000, X, Y)
[Thu Aug 23 20:25:17 2012] Writing source region out to fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23_src.reg
[Thu Aug 23 20:25:17 2012] Extracting stamp from image fullrun_pn_xmm0505010101_pi300-10000_cl_sm2.00.img.gz, (100, 226) - (186, 311)
[Thu Aug 23 20:25:17 2012] XMMSAS bgd. selection expression = annulus(12392.087400, 23317.656200, 1244.580036, 2489.160072, X, Y) && !ellipse(13183.998749, 23054.832153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11560.952789, 23044.140350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10233.760063, 22480.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12647.798325, 22608.436768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11972.658890, 22399.334625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9593.568779, 22257.072845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10146.894806, 22049.203964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10665.110062, 22052.751083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9155.603775, 21718.759018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10238.961929, 21257.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9506.236237, 20924.248138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10639.996803, 20925.924789, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 20:25:17 2012] Writing fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23.gif
[Thu Aug 23 20:35:25 2012] Mean detx,y = (-14660.64, -568.90) 
[Thu Aug 23 20:35:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 20:35:50 2012] grppha failed
[Thu Aug 23 20:35:50 2012] Setting source spectrum file to fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23_src.pi.gz
[Thu Aug 23 20:35:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Aug 23 20:59:50 2012] Updating aperture counts using extracted products
[Thu Aug 23 20:59:50 2012] Error reading totcts from fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23_src.pi.gz
[Thu Aug 23 20:59:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 20:59:54 2012] Source 23 has no response, skipping
[Thu Aug 23 20:59:55 2012] xmm0505010101/analysis//spectral/fullrun_pn_xmm0505010101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete