[Thu Aug 23 12:57:01 2012] Detection parameters:
  Position = (398.4, 318.8) = 12 22 51.01 58 14 33.6
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 273.2 +/- 50.8
  Background counts = 682.1
  Rate = 0.03 +/- 0.006

[Thu Aug 23 12:57:01 2012] Off-axis axis estimate = 7.40'
[Thu Aug 23 17:13:14 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:13:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 17:13:14 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Thu Aug 23 17:13:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.594
[Thu Aug 23 17:13:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.13"
[Thu Aug 23 17:17:54 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Aug 23 17:17:54 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Aug 23 17:17:54 2012] Fit fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Aug 23 17:17:54 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Aug 23 17:17:54 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Aug 23 17:17:54 2012] Fit fullrun_mos1_xmm0505010101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Aug 23 17:20:56 2012] Spatial fit model total counts = 1106.110000, observed total counts = 1099.000000
[Thu Aug 23 17:20:56 2012] Offset between fit and detection position for source 2 = 5.625241 pixels
[Thu Aug 23 17:20:56 2012] 1096.455000 total counts/ 953.847000 bgd. counts: snr = 4.617475
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.625241 pixels
  Position = (392.9, 319.9) = 12 22 54.05 58 14 36.4
  Extent = 20.3 (17.4-40.5)" x 5.9 (4.0-8.4)", rotation angle = 71 (63-80) degrees
  Source counts = 142.6 +/- 33.1
  Background counts = 953.8
  Rate = 0.02 +/- 0.004
[Thu Aug 23 17:20:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 17:20:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 17:20:56 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 17:20:56 2012] Source does appear to be extended
[Thu Aug 23 17:20:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.09
[Thu Aug 23 17:20:56 2012] Source is asymmetric
[Thu Aug 23 20:18:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 20:18:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 20:18:22 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Aug 23 20:18:22 2012] source mask rpix=3.0, npix_max = 49, mask sum = 41, frac = 0.836
[Thu Aug 23 20:18:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.06"
[Thu Aug 23 20:21:46 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Aug 23 20:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2.csv
[Thu Aug 23 20:21:46 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Aug 23 20:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2.csv
[Thu Aug 23 20:21:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:21:46 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Aug 23 20:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug 23 20:21:46 2012] fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Aug 23 20:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug 23 20:21:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505010101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:25:07 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Thu Aug 23 20:25:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:25:07 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 20:25:07 2012] Source does appear to be extended
[Thu Aug 23 20:25:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.09
[Thu Aug 23 20:25:07 2012] Source is asymmetric
[Thu Aug 23 20:56:30 2012] XMMSAS src. selection expression = ellipse(34135.536000, 27786.437200, 1215.324035, 351.907810, 70.609583, X, Y)
[Thu Aug 23 20:56:30 2012] Writing source region out to fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 23 20:56:30 2012] Extracting stamp from image fullrun_mos1_xmm0505010101_pi300-10000_cl_sm2.00.img.gz, (323, 250) - (463, 390)
[Thu Aug 23 20:56:30 2012] XMMSAS bgd. selection expression = annulus(34135.536000, 27786.437200, 2025.540058, 4051.080117, X, Y)
[Thu Aug 23 20:56:30 2012] Writing fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2.gif
[Thu Aug 23 20:56:55 2012] Mean detx,y = (-2401.55, 7042.20) 
[Thu Aug 23 20:56:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 20:57:43 2012] grppha failed
[Thu Aug 23 20:57:43 2012] Setting source spectrum file to fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 20:57:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 23 20:59:51 2012] Updating aperture counts using extracted products
[Thu Aug 23 20:59:51 2012] Error reading totcts from fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 20:59:51 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 20:59:52 2012] Source 2 has no response, skipping
[Thu Aug 23 20:59:53 2012] xmm0505010101/analysis//spectral/fullrun_mos1_xmm0505010101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete