[Sat Feb 11 13:21:03 2012] Detection parameters:
  Position = (177.4, 337.5) = 14 28 55.76 -60 50 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.2 +/- 14.8
  Background counts = 56.0
  Rate = 0.003 +/- 0.0007

[Sat Feb 11 13:21:03 2012] Off-axis axis estimate = 9.22'
[Sat Feb 11 13:23:09 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 13:23:09 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Feb 11 13:23:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sat Feb 11 13:23:09 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.04"
[Sat Feb 11 13:38:05 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Feb 11 13:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10.csv
[Sat Feb 11 13:38:05 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Feb 11 13:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10.csv
[Sat Feb 11 13:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 13:38:05 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Feb 11 13:38:05 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Feb 11 13:38:05 2012] Fit fullrun_pn_xmm0504990101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Feb 11 13:54:22 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.227520 pixels away
[Sat Feb 11 13:54:22 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 13:54:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 13:54:22 2012] Assessing source extent using major
[Sat Feb 11 13:54:22 2012] Source does appear to be extended
[Sat Feb 11 13:54:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 13:54:28 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 13:54:28 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Feb 11 13:54:28 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sat Feb 11 13:54:28 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.04"
[Sat Feb 11 14:06:13 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9.ximg exists
[Sat Feb 11 14:06:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9.csv
[Sat Feb 11 14:06:13 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Feb 11 14:06:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9.csv
[Sat Feb 11 14:06:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 14:06:13 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 11 14:06:13 2012] fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 11 14:06:13 2012] Fit fullrun_pn_xmm0504990101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 11 14:20:17 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 108.070996 pixels away
[Sat Feb 11 14:20:17 2012] Spatial fit model total counts = 470.951000, observed total counts = 471.000000
[Sat Feb 11 14:20:17 2012] Offset between fit and detection position for source 11 = 1.820248 pixels
[Sat Feb 11 14:20:17 2012] 485.633000 total counts/ 355.490000 bgd. counts: snr = 6.902511
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.820248 pixels
  Position = (175.6, 337.8) = 14 28 56.84 -60 50 30.5
  Extent = 14.2 (5.7-22.1)", rotation angle = 0
  Source counts = 130.1 +/- 22.0
  Background counts = 355.5
  Rate = 0.006 +/- 0.001
[Sat Feb 11 14:20:17 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 14:20:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 14:20:17 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 14:20:17 2012] Source does appear to be extended
[Sat Feb 11 14:20:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 14:20:25 2012] XMMSAS src. selection expression = ellipse(15228.302600, 29341.664940, 853.734025, 853.734025, 0.000000, X, Y)
[Sat Feb 11 14:20:25 2012] Writing source region out to fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11_src.reg
[Sat Feb 11 14:20:25 2012] Extracting stamp from image fullrun_pn_xmm0504990101_pi300-10000_cl_sm2.00.img.gz, (127, 289) - (225, 387)
[Sat Feb 11 14:20:25 2012] XMMSAS bgd. selection expression = annulus(15228.302600, 29341.664940, 1422.890041, 2845.780082, X, Y)
[Sat Feb 11 14:20:25 2012] Writing fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11.gif
[Sat Feb 11 14:25:14 2012] Mean detx,y = (-10004.58, -5180.55) 
[Sat Feb 11 14:25:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 14:25:40 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 14:25:40 2012] Setting source spectrum file to fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Feb 11 14:25:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Feb 11 14:41:25 2012] Updating aperture counts using extracted products
[Sat Feb 11 14:41:25 2012] Error reading totcts from fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Feb 11 14:41:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 14:41:25 2012] Using photon index=1.80, rate=0.00641, arf fullrun_pn_xmm0504990101_pi300-10000_pass1_cl_src11.arf
[Sat Feb 11 14:41:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 14:41:25 2012] Updating source flux to 3.5e-14