[Fri Mar 16 04:02:01 2012] Detection parameters:
  Position = (362.1, 370.7) = 17 44 23.48 -29 17 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 14.3
  Background counts = 5.6
  Rate = 0.02 +/- 0.003

[Fri Mar 16 04:02:01 2012] Off-axis axis estimate = 6.98'
[Fri Mar 16 04:26:07 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 04:26:07 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Mar 16 04:26:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Fri Mar 16 04:26:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.92"
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 04:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Mar 16 04:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:57:20 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.629579 pixels away
[Fri Mar 16 04:57:20 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 04:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 04:57:20 2012] Assessing source extent using major
[Fri Mar 16 04:57:20 2012] Source does appear to be extended
[Fri Mar 16 04:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 05:13:30 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 05:13:30 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Mar 16 05:13:30 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Fri Mar 16 05:13:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.92"
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar 16 05:39:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar 16 05:39:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 05:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar 16 05:39:36 2012] Fit fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Mar 16 05:49:21 2012] Spatial fit model total counts = 164.413000, observed total counts = 165.000000
[Fri Mar 16 05:49:21 2012] Offset between fit and detection position for source 3 = 0.211141 pixels
[Fri Mar 16 05:49:21 2012] 165.961000 total counts/ 70.977400 bgd. counts: snr = 11.274274
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.211141 pixels
  Position = (362.0, 370.6) = 17 44 23.53 -29 17 43.3
  Extent = 5.3 (4.3-6.4)", rotation angle = 0
  Source counts = 95.0 +/- 12.9
  Background counts = 71.0
  Rate = 0.01 +/- 0.002
[Fri Mar 16 05:49:21 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 05:49:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 05:49:21 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 05:49:21 2012] Source does appear to be extended
[Fri Mar 16 05:49:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 05:57:46 2012] XMMSAS src. selection expression = ellipse(31443.861640, 32191.214400, 319.974009, 319.974009, 0.000000, X, Y)
[Fri Mar 16 05:57:46 2012] Writing source region out to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3_src.reg
[Fri Mar 16 05:57:46 2012] Extracting stamp from image fullrun_mos1_xmm0504940701_pi300-10000_cl_sm2.00.img.gz, (344, 352) - (380, 389)
[Fri Mar 16 05:57:46 2012] XMMSAS bgd. selection expression = annulus(31443.861640, 32191.214400, 533.290015, 1066.580031, X, Y)
[Fri Mar 16 05:57:46 2012] Writing fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3.gif
[Fri Mar 16 05:57:57 2012] Mean detx,y = (4859.61, 4172.58) 
[Fri Mar 16 05:57:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 05:58:05 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 05:58:05 2012] Setting source spectrum file to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 05:58:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Mar 16 06:04:28 2012] Not generating rmf since there are only 94 counts
[Fri Mar 16 06:04:28 2012] rmf not generated due to insufficient counts
[Fri Mar 16 06:15:03 2012] Updating aperture counts using extracted products
[Fri Mar 16 06:15:03 2012] Error reading totcts from fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 06:15:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 06:15:03 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src3.arf
[Fri Mar 16 06:15:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 06:15:03 2012] Updating source flux to 2.2e-13
[Fri Mar 16 06:15:05 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting