[Fri Mar 16 04:02:01 2012] Detection parameters:
  Position = (277.3, 329.3) = 17 44 51.70 -29 20 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1205.1 +/- 42.2
  Background counts = 8.6
  Rate = 0.2 +/- 0.007

[Fri Mar 16 04:02:01 2012] Off-axis axis estimate = 2.71'
[Fri Mar 16 04:26:07 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 04:26:07 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Mar 16 04:26:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.192
[Fri Mar 16 04:26:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.78"
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 04:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 04:45:55 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 04:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 04:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:57:20 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.596043 pixels away
[Fri Mar 16 04:57:20 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 04:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 04:57:20 2012] Assessing source extent using major
[Fri Mar 16 04:57:20 2012] Source does appear to be extended
[Fri Mar 16 04:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 04:57:20 2012] Source is confused with source 5
[Fri Mar 16 05:13:30 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 05:13:30 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Mar 16 05:13:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.192
[Fri Mar 16 05:13:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.78"
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 05:39:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 05:39:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 05:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 05:39:36 2012] fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 05:39:36 2012] Fit fullrun_mos1_xmm0504940701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 05:49:21 2012] Spatial fit model total counts = 1208.920000, observed total counts = 1169.000000
[Fri Mar 16 05:49:21 2012] Offset between fit and detection position for source 1 = 0.249408 pixels
[Fri Mar 16 05:49:21 2012] 1216.098000 total counts/ 369.631000 bgd. counts: snr = 44.027684
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.249408 pixels
  Position = (277.2, 329.5) = 17 44 51.73 -29 20 41.9
  Extent = 5.5 (5.2-5.9)", rotation angle = 0
  Source counts = 846.5 +/- 34.9
  Background counts = 369.6
  Rate = 0.1 +/- 0.005
[Fri Mar 16 05:49:21 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 05:49:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 05:49:21 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 05:49:21 2012] Source does appear to be extended
[Fri Mar 16 05:49:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 05:57:46 2012] XMMSAS src. selection expression = ellipse(24067.380860, 28620.390200, 332.109610, 332.109610, 0.000000, X, Y)
[Fri Mar 16 05:57:46 2012] Writing source region out to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 05:57:46 2012] Extracting stamp from image fullrun_mos1_xmm0504940701_pi300-10000_cl_sm2.00.img.gz, (258, 310) - (296, 349)
[Fri Mar 16 05:57:46 2012] XMMSAS bgd. selection expression = annulus(24067.380860, 28620.390200, 553.516016, 1107.032032, X, Y) && !ellipse(24269.890381, 27998.233856, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 05:57:46 2012] Writing fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 05:57:48 2012] Mean detx,y = (1304.97, -3207.02) 
[Fri Mar 16 05:57:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 05:57:55 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 05:57:55 2012] Setting source spectrum file to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 05:57:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 06:15:03 2012] Updating aperture counts using extracted products
[Fri Mar 16 06:15:03 2012] Error reading totcts from fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 06:15:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 06:15:03 2012] Using photon index=1.80, rate=0.128, arf fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 06:15:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 06:15:03 2012] Updating source flux to 1.7e-12
[Fri Mar 16 06:15:05 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Mar 16 06:15:24 2012] Reading fit data from xmm0504940701/analysis//spectral/fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 06:15:24 2012] Spectral fit parameter nH value = 1.91183e+23
[Fri Mar 16 06:15:24 2012] Spectral fit parameter PhoIndex value = 1.73872
[Fri Mar 16 06:15:24 2012] Failed to get F(0.3-8.0) from xmm0504940701/analysis//spectral/fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 06:15:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 06:15:24 2012] Using Nh = 1.9e+23, photon index=1.74, rate=0.128, arf fullrun_mos1_xmm0504940701_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 06:15:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 06:15:24 2012] Updating source flux to 6e-12