[Fri Dec 16 22:22:51 2011] Detection parameters:
  Position = (401.6, 188.9) = 17 45 57.41 -29 30 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.8 +/- 17.8
  Background counts = 37.4
  Rate = 0.03 +/- 0.004

[Fri Dec 16 22:22:51 2011] Off-axis axis estimate = 10.91'
[Fri Dec 16 22:24:28 2011] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:24:28 2011] Initial guess for spatial extent in simple fitting = 11.88"
[Fri Dec 16 22:24:28 2011] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.575
[Fri Dec 16 22:24:28 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 11.88"
[Sat Dec 17 00:13:51 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29.ximg exists
[Sat Dec 17 00:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29.csv
[Sat Dec 17 00:13:51 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Dec 17 00:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29.csv
[Sat Dec 17 00:13:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 00:13:52 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Dec 17 00:13:52 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Dec 17 00:13:52 2011] Fit fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Dec 17 01:08:55 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.607381 pixels away
[Sat Dec 17 01:08:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 01:08:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 01:08:55 2011] Assessing source extent using major
[Sat Dec 17 01:08:55 2011] Source does appear to be extended
[Sat Dec 17 01:08:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 01:09:06 2011] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 01:09:06 2011] Initial guess for spatial extent in simple fitting = 11.88"
[Sat Dec 17 01:09:06 2011] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.575
[Sat Dec 17 01:09:06 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 11.88"
[Sat Dec 17 02:24:08 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src23.ximg exists
[Sat Dec 17 02:24:08 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Dec 17 02:24:08 2011] Fit fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src23 appears to have run properly
[Sat Dec 17 02:24:09 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Dec 17 02:24:09 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Dec 17 02:24:09 2011] Fit fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Dec 17 04:38:20 2011] Source 29 is offset by 7.330996 and 1.903508 pixels which is larger than
2 X fitted extent = 2.841743 x 2.841743, not incorporating fit results
[Sat Dec 17 04:38:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 04:38:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 04:38:20 2011] Assessing source extent using major
[Sat Dec 17 04:38:20 2011] Source does appear to be extended
[Sat Dec 17 04:38:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 04:38:33 2011] XMMSAS src. selection expression = ellipse(34888.844666, 16389.199234, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 04:38:33 2011] Writing source region out to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29_src.reg
[Sat Dec 17 04:38:33 2011] Extracting stamp from image fullrun_pn_xmm0504940601_pi300-10000_cl_sm2.00.img.gz, (364, 151) - (439, 226)
[Sat Dec 17 04:38:33 2011] XMMSAS bgd. selection expression = annulus(34888.844666, 16389.199234, 1087.500000, 2175.000000, X, Y) && !ellipse(32833.594000, 15936.823200, 1804.276852, 1804.276852, 0.000000, X, Y) && !ellipse(32598.135834, 14491.660416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32840.388702, 20009.167067, 1665.240048, 678.389688, 92.549117, X, Y) && !ellipse(32790.680800, 19280.693800, 1665.240048, 532.036015, 94.083240, X, Y) && !ellipse(32824.349640, 18218.745407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34917.319855, 17278.531830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35164.760620, 15437.786743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33998.966461, 14217.091888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32801.996948, 13446.667435, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 04:38:33 2011] Writing fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29.gif
[Sat Dec 17 04:53:22 2011] Mean detx,y = (7770.73, 11036.83) 
[Sat Dec 17 04:53:26 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 04:53:49 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 04:53:50 2011] Setting source spectrum file to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 04:53:50 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Dec 17 05:25:39 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 05:25:39 2011] rmf not generated due to insufficient counts
[Sat Dec 17 06:02:57 2011] Updating aperture counts using extracted products
[Sat Dec 17 06:02:57 2011] Error reading totcts from fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 06:02:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 06:02:58 2011] Using photon index=1.80, rate=0.0261, arf fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src29.arf
[Sat Dec 17 06:02:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 06:02:58 2011] Updating source flux to 1.5e-13
[Sat Dec 17 06:04:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting