[Fri Dec 16 22:22:51 2011] Detection parameters:
  Position = (377.8, 210.0) = 17 46 5.32 -29 28 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.3 +/- 23.9
  Background counts = 43.2
  Rate = 0.1 +/- 0.009

[Fri Dec 16 22:22:51 2011] Off-axis axis estimate = 8.62'
[Fri Dec 16 22:24:28 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:24:28 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Fri Dec 16 22:24:28 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Fri Dec 16 22:24:28 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 10.74"
[Sat Dec 17 00:13:51 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25.ximg exists
[Sat Dec 17 00:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25.csv
[Sat Dec 17 00:13:51 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Dec 17 00:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25.csv
[Sat Dec 17 00:13:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 00:13:52 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Dec 17 00:13:52 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Dec 17 00:13:52 2011] Fit fullrun_pn_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Dec 17 01:08:55 2011] Warning, spatial fit 25 centroid is now closest to src. 23
[Sat Dec 17 01:08:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 01:08:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 01:08:55 2011] Assessing source extent using major
[Sat Dec 17 01:08:55 2011] Source does appear to be extended
[Sat Dec 17 01:08:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 01:08:55 2011] Source is confused with source 22
[Sat Dec 17 01:09:06 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 01:09:06 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Sat Dec 17 01:09:06 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Sat Dec 17 01:09:06 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 10.74"
[Sat Dec 17 02:24:08 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21.ximg exists
[Sat Dec 17 02:24:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 02:24:08 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Dec 17 02:24:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 02:24:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 02:24:09 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Dec 17 02:24:09 2011] fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Dec 17 02:24:09 2011] Fit fullrun_pn_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Dec 17 04:38:20 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 14.813509 pixels away
[Sat Dec 17 04:38:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 04:38:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 04:38:20 2011] Assessing source extent using major
[Sat Dec 17 04:38:20 2011] Source does appear to be extended
[Sat Dec 17 04:38:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 04:38:33 2011] XMMSAS src. selection expression = ellipse(32824.349640, 18218.745407, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 04:38:33 2011] Writing source region out to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25_src.reg
[Sat Dec 17 04:38:33 2011] Extracting stamp from image fullrun_pn_xmm0504940601_pi300-10000_cl_sm2.00.img.gz, (340, 172) - (415, 247)
[Sat Dec 17 04:38:33 2011] XMMSAS bgd. selection expression = annulus(32824.349640, 18218.745407, 1087.500000, 2175.000000, X, Y) && !ellipse(32833.594000, 15936.823200, 1804.276852, 1804.276852, 0.000000, X, Y) && !ellipse(31611.131348, 15690.119400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32847.761688, 21090.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32816.806702, 20392.806854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32840.388702, 20009.167067, 1665.240048, 678.389688, 92.549117, X, Y) && !ellipse(32790.680800, 19280.693800, 1665.240048, 532.036015, 94.083240, X, Y) && !ellipse(34917.319855, 17278.531830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34888.844666, 16389.199234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35164.760620, 15437.786743, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 04:38:33 2011] Writing fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25.gif
[Sat Dec 17 04:52:18 2011] Mean detx,y = (5822.24, 9257.32) 
[Sat Dec 17 04:52:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 04:52:37 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 04:52:37 2011] Setting source spectrum file to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Dec 17 04:52:37 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Dec 17 05:25:20 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 05:25:20 2011] rmf not generated due to insufficient counts
[Sat Dec 17 06:02:57 2011] Updating aperture counts using extracted products
[Sat Dec 17 06:02:57 2011] Error reading totcts from fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Dec 17 06:02:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 06:02:58 2011] Using photon index=1.80, rate=0.098, arf fullrun_pn_xmm0504940601_pi300-10000_pass1_cl_src25.arf
[Sat Dec 17 06:02:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 06:02:58 2011] Updating source flux to 4.5e-13
[Sat Dec 17 06:04:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting