[Fri Dec 16 22:23:07 2011] Detection parameters:
  Position = (392.2, 181.2) = 17 46 0.55 -29 31 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 483.9 +/- 27.7
  Background counts = 30.0
  Rate = 0.07 +/- 0.004

[Fri Dec 16 22:23:08 2011] Off-axis axis estimate = 10.88'
[Sat Dec 17 00:13:52 2011] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 00:13:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 00:13:52 2011] Initial guess for spatial extent in simple fitting = 11.87"
[Sat Dec 17 00:13:52 2011] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.719
[Sat Dec 17 00:13:52 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.87"
[Sat Dec 17 00:48:49 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2.ximg exists
[Sat Dec 17 00:48:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2.csv
[Sat Dec 17 00:48:49 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Dec 17 00:48:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2.csv
[Sat Dec 17 00:48:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 00:48:49 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Dec 17 00:48:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Dec 17 00:48:49 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Dec 17 00:48:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Dec 17 00:48:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 01:08:58 2011] Warning, spatial fit 2 centroid is now closest to src. 10
[Sat Dec 17 01:08:58 2011] Spatial fit model total counts = 677.883000, observed total counts = 676.000000
[Sat Dec 17 01:08:58 2011] Offset between fit and detection position for source 1 = 7.572225 pixels
[Sat Dec 17 01:08:58 2011] Warning, changing simple spatial fit ID from 2 to 4
[Sat Dec 17 01:08:58 2011] 643.133000 total counts/ 280.714000 bgd. counts: snr = 21.631116
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.572225 pixels
  Position = (399.4, 183.3) = 17 45 58.13 -29 30 55.8
  Extent = 24.5 (20.3-49.1)" x 24.2 (23.4-24.5)", rotation angle = 221 (125-90) degrees
  Source counts = 362.4 +/- 25.4
  Background counts = 280.7
  Rate = 0.07 +/- 0.005
[Sat Dec 17 01:08:58 2011] Spatial fit model total counts = 691.519000, observed total counts = 689.000000
[Sat Dec 17 01:08:58 2011] Offset between fit and detection position for source 1 = 4.223574 pixels
[Sat Dec 17 01:08:58 2011] Warning, changing simple spatial fit ID from 4 to 6
[Sat Dec 17 01:08:58 2011] 657.059500 total counts/ 593.780000 bgd. counts: snr = 2.596870
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.223574 pixels
  Position = (399.0, 187.5) = 17 45 58.27 -29 30 37.5
  Extent = 11.7 (6.3-24.1)", rotation angle = 0
  Source counts = 63.3 +/- 25.6
  Background counts = 593.8
  Rate = 0.01 +/- 0.005
[Sat Dec 17 01:08:58 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 01:08:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 01:08:58 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 01:08:58 2011] Source does appear to be extended
[Sat Dec 17 01:08:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 01:08:58 2011] Source is confused with source 2
[Sat Dec 17 02:24:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 02:24:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 02:24:09 2011] Initial guess for spatial extent in simple fitting = 11.74"
[Sat Dec 17 02:24:09 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026
[Sat Dec 17 02:24:09 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.74"
[Sat Dec 17 03:14:04 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2.ximg exists
[Sat Dec 17 03:14:04 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2.csv
[Sat Dec 17 03:14:04 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Dec 17 03:14:04 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2.csv
[Sat Dec 17 03:14:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 03:14:04 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Dec 17 03:14:04 2011] fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Dec 17 03:14:04 2011] Fit fullrun_mos1_xmm0504940601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Dec 17 04:38:23 2011] Warning, spatial fit 2 centroid is now closest to src. 11
[Sat Dec 17 04:38:23 2011] Spatial fit model total counts = 691.174000, observed total counts = 689.000000
[Sat Dec 17 04:38:23 2011] Offset between fit and detection position for source 1 = 0.885662 pixels
[Sat Dec 17 04:38:23 2011] Warning, changing simple spatial fit ID from 2 to 6
[Sat Dec 17 04:38:23 2011] 670.464800 total counts/ 620.452000 bgd. counts: snr = 2.007831
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.885662 pixels
  Position = (399.9, 187.8) = 17 45 57.98 -29 30 36.6
  Extent = 9.6 (4.3-23.9)", rotation angle = 0
  Source counts = 50.0 +/- 25.9
  Background counts = 620.5
  Rate = 0.009 +/- 0.005
[Sat Dec 17 04:38:23 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 04:38:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 04:38:23 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 04:38:23 2011] Source does appear to be extended
[Sat Dec 17 04:38:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 05:29:16 2011] XMMSAS src. selection expression = ellipse(34739.652000, 16285.756000, 576.067817, 576.067817, 0.000000, X, Y)
[Sat Dec 17 05:29:16 2011] Writing source region out to fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1_src.reg
[Sat Dec 17 05:29:16 2011] Extracting stamp from image fullrun_mos1_xmm0504940601_pi300-10000_cl_sm2.00.img.gz, (367, 155) - (433, 221)
[Sat Dec 17 05:29:16 2011] XMMSAS bgd. selection expression = annulus(34739.652000, 16285.756000, 960.113028, 1920.226055, X, Y) && !ellipse(33985.332886, 16222.070450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33993.903320, 15246.306030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35337.220703, 15528.401566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35161.707336, 17006.605057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35157.838000, 16434.908400, 1543.376044, 1543.376044, 0.000000, X, Y) && !ellipse(34831.230530, 18583.640686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34029.512573, 18615.951065, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 05:29:16 2011] Writing fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1.gif
[Sat Dec 17 05:29:38 2011] Mean detx,y = (-11015.78, 7331.59) 
[Sat Dec 17 05:29:39 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 05:29:46 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 05:29:46 2011] Setting source spectrum file to fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 17 05:29:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 17 05:32:07 2011] Not generating rmf since there are only 50 counts
[Sat Dec 17 05:32:07 2011] rmf not generated due to insufficient counts
[Sat Dec 17 06:02:58 2011] Updating aperture counts using extracted products
[Sat Dec 17 06:02:58 2011] Error reading totcts from fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 17 06:02:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 06:02:58 2011] Using photon index=1.80, rate=0.00938, arf fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1.arf
[Sat Dec 17 06:02:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 06:02:58 2011] Updating source flux to 1.9e-13
[Sat Dec 17 06:02:59 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Dec 17 06:02:59 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Dec 17 06:03:17 2011] xmm0504940601/analysis//spectral/fullrun_mos1_xmm0504940601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete