[Sun Mar 25 08:46:28 2012] Detection parameters:
  Position = (302.0, 317.0) = 17 45 43.11 -29 0 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1210.3 +/- 48.8
  Background counts = 119.2
  Rate = 0.1 +/- 0.005

[Sun Mar 25 08:46:30 2012] Off-axis axis estimate = 1.37'
[Sun Mar 25 08:51:21 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 08:51:21 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Sun Mar 25 08:51:21 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Sun Mar 25 08:51:21 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.11"
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 25 11:54:16 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 25 11:54:17 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Mar 25 14:50:21 2012] Spatial fit model total counts = 6164.260000, observed total counts = 6165.000000
[Sun Mar 25 14:50:21 2012] Offset between fit and detection position for source 4 = 4.725387 pixels
[Sun Mar 25 14:50:21 2012] 6285.350000 total counts/ 5216.050000 bgd. counts: snr = 14.805691
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.725387 pixels
  Position = (298.3, 319.9) = 17 45 44.35 -29 0 5.5
  Extent = 14.2 (14.2-28.5)", rotation angle = 0
  Source counts = 1069.3 +/- 79.3
  Background counts = 5216.1
  Rate = 0.1 +/- 0.008
[Sun Mar 25 14:50:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:21 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:21 2012] Source does appear to be extended
[Sun Mar 25 14:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 14:50:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 14:50:52 2012] Initial guess for spatial extent in simple fitting = 14.23"
[Sun Mar 25 14:50:52 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.126
[Sun Mar 25 14:50:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.23"
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4.csv
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4.csv
[Sun Mar 25 17:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Mar 25 17:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Mar 25 17:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 25 17:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:44:39 2012] Source 4 is offset by -3.923218 and -4.920253 pixels which is larger than
2 X fitted extent = 1.101384 x 1.101384, not incorporating fit results
[Sun Mar 25 19:44:39 2012] Warning, spatial fit 4 centroid is now closest to src. 27
[Sun Mar 25 19:44:39 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:39 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:39 2012] Source does appear to be extended
[Sun Mar 25 19:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 19:45:03 2012] Counts = 1069.300000, rescaling region sizes by 2.000000
[Sun Mar 25 19:45:03 2012] XMMSAS src. selection expression = ellipse(25900.616000, 27782.002000, 1707.144049, 1707.144049, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing source region out to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar 25 19:45:03 2012] Extracting stamp from image fullrun_pn_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (200, 222) - (396, 418)
[Sun Mar 25 19:45:03 2012] XMMSAS bgd. selection expression = annulus(25900.616000, 27782.002000, 5690.480164, 11380.960327, X, Y) && !ellipse(28162.894800, 26014.026800, 1515.307244, 1515.307244, 0.000000, X, Y) && !ellipse(27018.244660, 27376.753600, 766.564022, 766.564022, 0.000000, X, Y) && !ellipse(25607.319500, 29700.457400, 452.430413, 452.430413, 0.000000, X, Y) && !ellipse(15789.353775, 37172.177826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.340729, 31900.484406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.405212, 29169.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26963.568939, 28964.823822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.572693, 28953.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.250641, 28966.257538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.788422, 28957.857025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.242310, 28959.370392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.352417, 29095.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19808.973877, 28043.897705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.471283, 27785.361572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.980438, 25870.065918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28234.831840, 23889.866000, 1473.368042, 1473.368042, 0.000000, X, Y) && !ellipse(28217.654520, 23170.261600, 748.460822, 748.460822, 0.000000, X, Y) && !ellipse(26908.283800, 22538.468800, 680.290420, 436.623213, 112.481000, X, Y) && !ellipse(28184.500000, 22337.937400, 501.100814, 501.100814, 0.000000, X, Y) && !ellipse(28161.871277, 21704.561249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.831726, 21176.870193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28195.039800, 20951.046000, 1379.560040, 422.093612, 269.606700, X, Y) && !ellipse(28262.936200, 19349.195000, 736.468021, 736.468021, 0.000000, X, Y) && !ellipse(28186.841827, 19097.552139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28236.611760, 16637.089000, 852.432025, 852.432025, 0.000000, X, Y) && !ellipse(28214.419617, 16046.744263, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4.gif
[Sun Mar 25 19:59:04 2012] Mean detx,y = (-651.05, -213.72) 
[Sun Mar 25 19:59:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:07:09 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:07:09 2012] Setting source spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 25 20:07:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 26 03:55:41 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:41 2012] Error reading totcts from fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 26 03:55:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:43 2012] Using photon index=1.80, rate=0.11, arf fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src4.arf
[Mon Mar 26 03:55:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:44 2012] Updating source flux to 2.6e-13
[Mon Mar 26 04:03:06 2012] Flag b found in src. 4 procflags, skipping spectral fitting