[Sun Mar 25 08:46:29 2012] Detection parameters:
  Position = (301.6, 297.9) = 17 45 43.22 -29 1 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.5 +/- 23.9
  Background counts = 112.7
  Rate = 0.02 +/- 0.003

[Sun Mar 25 08:46:30 2012] Off-axis axis estimate = 0.24'
[Sun Mar 25 08:51:21 2012] Using EEF radius (= 6.55 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 08:51:21 2012] Initial guess for spatial extent in simple fitting = 6.55"
[Sun Mar 25 08:51:21 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.995
[Sun Mar 25 08:51:21 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 6.55"
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26.csv
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26.csv
[Sun Mar 25 11:54:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Mar 25 11:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Mar 25 11:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Mar 25 11:54:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:50:21 2012] Warning, spatial fit 26 centroid is now closest to src. 30
[Sun Mar 25 14:50:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:21 2012] Assessing source extent using major
[Sun Mar 25 14:50:21 2012] Source does appear to be extended
[Sun Mar 25 14:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:52 2012] Using EEF radius (= 6.55 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 14:50:52 2012] Initial guess for spatial extent in simple fitting = 6.55"
[Sun Mar 25 14:50:52 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.995
[Sun Mar 25 14:50:52 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 6.55"
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18.csv
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18.csv
[Sun Mar 25 17:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Mar 25 17:16:24 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Mar 25 19:44:39 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 19.493491 pixels away
[Sun Mar 25 19:44:39 2012] Source 27 is offset by -6.370616 and -5.414829 pixels which is larger than
2 X fitted extent = 1.587131 x 1.587131, not incorporating fit results
[Sun Mar 25 19:44:39 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:39 2012] Assessing source extent using major
[Sun Mar 25 19:44:39 2012] Source does appear to be extended
[Sun Mar 25 19:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 19:45:03 2012] XMMSAS src. selection expression = ellipse(26194.980438, 25870.065918, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing source region out to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27_src.reg
[Sun Mar 25 19:45:03 2012] Extracting stamp from image fullrun_pn_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (264, 260) - (339, 335)
[Sun Mar 25 19:45:03 2012] XMMSAS bgd. selection expression = annulus(26194.980438, 25870.065918, 1087.500000, 2175.000000, X, Y) && !ellipse(28162.894800, 26014.026800, 1515.307244, 1515.307244, 0.000000, X, Y) && !ellipse(27018.244660, 27376.753600, 766.564022, 766.564022, 0.000000, X, Y) && !ellipse(25900.616000, 27782.002000, 1138.096033, 1138.096033, 0.000000, X, Y) && !ellipse(28234.831840, 23889.866000, 1473.368042, 1473.368042, 0.000000, X, Y) && !ellipse(28217.654520, 23170.261600, 748.460822, 748.460822, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27.gif
[Sun Mar 25 20:22:48 2012] Mean detx,y = (-728.56, 1507.09) 
[Sun Mar 25 20:22:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:23:41 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:23:42 2012] Setting source spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Mar 25 20:23:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Mar 26 01:04:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 01:04:25 2012] rmf not generated due to insufficient counts
[Mon Mar 26 03:55:42 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:42 2012] Error reading totcts from fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Mar 26 03:55:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:44 2012] Using photon index=1.80, rate=0.0169, arf fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src27.arf
[Mon Mar 26 03:55:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:44 2012] Updating source flux to 4.4e-14
[Mon Mar 26 04:03:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting