[Sun Mar 25 08:46:28 2012] Detection parameters:
  Position = (305.8, 335.8) = 17 45 41.84 -28 58 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 22.4
  Background counts = 112.9
  Rate = 0.02 +/- 0.003

[Sun Mar 25 08:46:30 2012] Off-axis axis estimate = 2.76'
[Sun Mar 25 08:51:21 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 08:51:21 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Mar 25 08:51:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.759
[Sun Mar 25 08:51:21 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.81"
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17.csv
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17.csv
[Sun Mar 25 11:54:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Mar 25 11:54:17 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Mar 25 14:50:21 2012] Source 17 is offset by 1.279235 and -6.866231 pixels which is larger than
2 X fitted extent = 1.330524 x 1.330524, not incorporating fit results
[Sun Mar 25 14:50:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:21 2012] Assessing source extent using major
[Sun Mar 25 14:50:21 2012] Source does appear to be extended
[Sun Mar 25 14:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:21 2012] Source is confused with source 18
[Sun Mar 25 14:50:21 2012] Source is confused with source 22
[Sun Mar 25 14:50:52 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 14:50:52 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Mar 25 14:50:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.759
[Sun Mar 25 14:50:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.81"
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10.csv
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10.csv
[Sun Mar 25 17:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Mar 25 17:16:24 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Mar 25 19:44:39 2012] Source 17 is offset by 1.297483 and -6.857404 pixels which is larger than
2 X fitted extent = 1.339812 x 1.339812, not incorporating fit results
[Sun Mar 25 19:44:39 2012] Spatial fit model total counts = 1984.750000, observed total counts = 1464.000000
[Sun Mar 25 19:44:39 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 19:44:39 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:39 2012] Assessing source extent using major
[Sun Mar 25 19:44:39 2012] Source does appear to be extended
[Sun Mar 25 19:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 19:45:03 2012] XMMSAS src. selection expression = ellipse(26557.405212, 29169.077881, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing source region out to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17_src.reg
[Sun Mar 25 19:45:03 2012] Extracting stamp from image fullrun_pn_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (268, 298) - (343, 373)
[Sun Mar 25 19:45:03 2012] XMMSAS bgd. selection expression = annulus(26557.405212, 29169.077881, 1087.500000, 2175.000000, X, Y) && !ellipse(28162.894800, 26014.026800, 1515.307244, 1515.307244, 0.000000, X, Y) && !ellipse(27018.244660, 27376.753600, 766.564022, 766.564022, 0.000000, X, Y) && !ellipse(25607.319500, 29700.457400, 452.430413, 452.430413, 0.000000, X, Y) && !ellipse(25900.616000, 27782.002000, 1138.096033, 1138.096033, 0.000000, X, Y) && !ellipse(28038.340729, 31900.484406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26963.568939, 28964.823822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.572693, 28953.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.250641, 28966.257538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.788422, 28957.857025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.242310, 28959.370392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.352417, 29095.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.471283, 27785.361572, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17.gif
[Sun Mar 25 20:11:29 2012] Mean detx,y = (-430.27, -1753.12) 
[Sun Mar 25 20:11:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:12:13 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:12:14 2012] Setting source spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar 25 20:12:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Mar 26 00:31:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 00:31:41 2012] rmf not generated due to insufficient counts
[Mon Mar 26 03:55:42 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:42 2012] Error reading totcts from fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Mar 26 03:55:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:44 2012] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src17.arf
[Mon Mar 26 03:55:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:44 2012] Updating source flux to 5.1e-14
[Mon Mar 26 04:03:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting