[Sun Mar 25 08:46:28 2012] Detection parameters:
  Position = (324.2, 299.8) = 17 45 35.73 -29 1 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76789.3 +/- 328.7
  Background counts = 114.8
  Rate = 8 +/- 0.03

[Sun Mar 25 08:46:30 2012] Off-axis axis estimate = 1.87'
[Sun Mar 25 08:51:21 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 08:51:21 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Mar 25 08:51:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sun Mar 25 08:51:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 11:54:16 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 11:54:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 11:54:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 11:54:17 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 11:54:17 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 14:50:21 2012] Spatial fit model total counts = 66094.400000, observed total counts = 66103.000000
[Sun Mar 25 14:50:21 2012] Offset between fit and detection position for source 1 = 0.201327 pixels
[Sun Mar 25 14:50:21 2012] 66289.600000 total counts/ 16216.800000 bgd. counts: snr = 393.205240
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.201327 pixels
  Position = (324.3, 299.6) = 17 45 35.72 -29 1 33.9
  Extent = 6.3 (6.3-6.4)", rotation angle = 0
  Source counts = 50072.8 +/- 257.5
  Background counts = 16216.8
  Rate = 5 +/- 0.03
[Sun Mar 25 14:50:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:21 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 14:50:21 2012] Source does appear to be extended
[Sun Mar 25 14:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 14:50:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 14:50:52 2012] Initial guess for spatial extent in simple fitting = 6.31"
[Sun Mar 25 14:50:52 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.050
[Sun Mar 25 14:50:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.31"
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 17:16:23 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 17:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 17:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 17:16:24 2012] fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 17:16:24 2012] Fit fullrun_pn_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 19:44:39 2012] Spatial fit model total counts = 66103.100000, observed total counts = 66103.000000
[Sun Mar 25 19:44:39 2012] Offset between fit and detection position for source 1 = 0.000555 pixels
[Sun Mar 25 19:44:39 2012] 66298.100000 total counts/ 16214.700000 bgd. counts: snr = 393.313945
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000555 pixels
  Position = (324.3, 299.6) = 17 45 35.72 -29 1 33.9
  Extent = 6.3 (6.3-6.4)", rotation angle = 0
  Source counts = 50083.4 +/- 257.5
  Background counts = 16214.7
  Rate = 5 +/- 0.03
[Sun Mar 25 19:44:39 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:39 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:39 2012] Source does appear to be extended
[Sun Mar 25 19:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 19:45:03 2012] Counts = 50083.400000, rescaling region sizes by 3.000000
[Sun Mar 25 19:45:03 2012] XMMSAS src. selection expression = ellipse(28162.894800, 26014.026800, 1136.480433, 1136.480433, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing source region out to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 25 19:45:03 2012] Extracting stamp from image fullrun_pn_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (259, 234) - (390, 365)
[Sun Mar 25 19:45:03 2012] XMMSAS bgd. selection expression = annulus(28162.894800, 26014.026800, 5682.402164, 11364.804327, X, Y) && !ellipse(27018.244660, 27376.753600, 766.564022, 766.564022, 0.000000, X, Y) && !ellipse(25607.319500, 29700.457400, 452.430413, 452.430413, 0.000000, X, Y) && !ellipse(25900.616000, 27782.002000, 1138.096033, 1138.096033, 0.000000, X, Y) && !ellipse(28204.189789, 14390.086960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.340729, 31900.484406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.405212, 29169.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26963.568939, 28964.823822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.572693, 28953.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.250641, 28966.257538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.788422, 28957.857025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.242310, 28959.370392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.352417, 29095.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19808.973877, 28043.897705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.471283, 27785.361572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.980438, 25870.065918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28234.831840, 23889.866000, 1473.368042, 1473.368042, 0.000000, X, Y) && !ellipse(28217.654520, 23170.261600, 748.460822, 748.460822, 0.000000, X, Y) && !ellipse(26908.283800, 22538.468800, 680.290420, 436.623213, 112.481000, X, Y) && !ellipse(28184.500000, 22337.937400, 501.100814, 501.100814, 0.000000, X, Y) && !ellipse(28161.871277, 21704.561249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.831726, 21176.870193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28195.039800, 20951.046000, 1379.560040, 422.093612, 269.606700, X, Y) && !ellipse(28262.936200, 19349.195000, 736.468021, 736.468021, 0.000000, X, Y) && !ellipse(28186.841827, 19097.552139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28236.611760, 16637.089000, 852.432025, 852.432025, 0.000000, X, Y) && !ellipse(28214.419617, 16046.744263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28216.397614, 15255.873428, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 19:45:03 2012] Writing fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1.gif
[Sun Mar 25 19:45:50 2012] Mean detx,y = (1180.42, 1380.33) 
[Sun Mar 25 19:45:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 19:52:42 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 19:52:42 2012] Setting source spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 19:52:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 03:55:41 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:41 2012] Error reading totcts from fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 03:55:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:43 2012] Using photon index=1.80, rate=5.13, arf fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 03:55:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:43 2012] Updating source flux to 1.2e-11
[Mon Mar 26 04:08:17 2012] Reading fit data from xmm0504940201/analysis//spectral/fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 04:08:17 2012] Spectral fit parameter nH value = 2.49729e+23
[Mon Mar 26 04:08:17 2012] Spectral fit parameter PhoIndex value = 2.88591
[Mon Mar 26 04:08:17 2012] Failed to get F(0.3-8.0) from xmm0504940201/analysis//spectral/fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 04:08:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 04:08:17 2012] Using Nh = 2.5e+23, photon index=2.89, rate=5.13, arf fullrun_pn_xmm0504940201_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 04:08:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 04:08:17 2012] Updating source flux to 5e-11