[Sun Mar 25 08:47:58 2012] Detection parameters:
  Position = (341.7, 223.8) = 17 45 29.92 -29 7 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 16.4
  Background counts = 22.5
  Rate = 0.02 +/- 0.002

[Sun Mar 25 08:47:58 2012] Off-axis axis estimate = 6.26'
[Sun Mar 25 13:32:09 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 13:32:09 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Sun Mar 25 13:32:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.859
[Sun Mar 25 13:32:09 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.56"
[Sun Mar 25 14:50:03 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Mar 25 14:50:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6.csv
[Sun Mar 25 14:50:03 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Mar 25 14:50:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6.csv
[Sun Mar 25 14:50:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Mar 25 14:50:04 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Mar 25 14:50:04 2012] Fit fullrun_mos2_xmm0504940201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Mar 25 14:50:36 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.863246 pixels away
[Sun Mar 25 14:50:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:50:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:50:36 2012] Assessing source extent using major
[Sun Mar 25 14:50:36 2012] Source does appear to be extended
[Sun Mar 25 14:50:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:47:30 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:47:30 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Sun Mar 25 18:47:30 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.859
[Sun Mar 25 18:47:30 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.56"
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6.csv
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Mar 25 19:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6.csv
[Sun Mar 25 19:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Mar 25 19:44:25 2012] fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Mar 25 19:44:25 2012] Fit fullrun_mos2_xmm0504940201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Mar 25 19:44:50 2012] Spatial fit model total counts = 349.580000, observed total counts = 356.000000
[Sun Mar 25 19:44:50 2012] Offset between fit and detection position for source 7 = 0.161590 pixels
[Sun Mar 25 19:44:50 2012] 352.602000 total counts/ 231.212000 bgd. counts: snr = 7.983213
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.161590 pixels
  Position = (341.7, 223.6) = 17 45 29.94 -29 7 4.2
  Extent = 5.6 (4.6-6.9)", rotation angle = 0
  Source counts = 121.4 +/- 18.8
  Background counts = 231.2
  Rate = 0.01 +/- 0.001
[Sun Mar 25 19:44:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:44:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:44:50 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 19:44:50 2012] Source does appear to be extended
[Sun Mar 25 19:44:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:59:55 2012] XMMSAS src. selection expression = ellipse(29676.276400, 19407.088800, 335.599210, 335.599210, 0.000000, X, Y)
[Mon Mar 26 02:59:55 2012] Writing source region out to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7_src.reg
[Mon Mar 26 02:59:55 2012] Extracting stamp from image fullrun_mos2_xmm0504940201_pi300-10000_cl_sm2.00.img.gz, (322, 204) - (361, 243)
[Mon Mar 26 02:59:55 2012] XMMSAS bgd. selection expression = annulus(29676.276400, 19407.088800, 559.332016, 1118.664032, X, Y)
[Mon Mar 26 02:59:55 2012] Writing fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7.gif
[Mon Mar 26 03:08:31 2012] Mean detx,y = (-2584.59, -8121.12) 
[Mon Mar 26 03:08:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 03:08:46 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 03:08:47 2012] Setting source spectrum file to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 03:08:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Mar 26 03:55:48 2012] Updating aperture counts using extracted products
[Mon Mar 26 03:55:48 2012] Error reading totcts from fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 03:55:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 03:55:49 2012] Using photon index=1.80, rate=0.00959, arf fullrun_mos2_xmm0504940201_pi300-10000_pass1_cl_src7.arf
[Mon Mar 26 03:55:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 03:55:49 2012] Updating source flux to 1.6e-13